Private Sale Bucher GmbH: Lot Listing
All available lots have been sold – Private Sale completed
319 Sold Lots:
Lot | Description | Amount | Details |
---|---|---|---|
1a | L+Z Lathe | 1 | EMCO EmcoMAT-17S, YOM 2004, Ser. no. 93-4V3, travel X/Z 220 x 710 mm, center height/width 170 x 700 mm, max. speed 3,000 rpm, tailstock, internal cone MK3, three-jaw chuck, Ø 250 mm, quick-change steel holder, Multifix system, roller table, work table |
2a | Aluminium Folding Ladder | 1 | 8-stage, H 1,900 mm |
3a | Painting Racks | 2 | 1,500 / 1,000 x 1,200 mm, 10 painting stands |
4a | Gas Cylinder Transport Trolley | 1 | Burner set, without gas cylinder, work table, 2,000 x 600 x 900 mm |
5a | Double Sanding Block | 1 | Grinding wheel Ø 120 mm |
6a | Angle Bender | 1 | KARNASCH, YOM 2002, Order no. 100E |
7a | lot of Tool Racks | 1 | 3x 600 x 400 x 1,700 mm, 1x 2,000 x 400 x 1,700 mm, 1x 3,600 x 400 x 800 mm, self-construction, welded, wooden shelves, contents: various residual materials |
8a | Two-hand Drill | 1 | KRESS 850-SB-2, YOM 2004, Cordless screwdriver, Kress, type 144 AFB 1.5 set, 2x battery, angle attachment, charger |
9a | Socket Box | 1 | PROMAT, complete |
10a | Work Table | 1 | Self-built, welded, 3,000 x 1,600 mm, wooden support |
11a | MIG-MAG Welding Inverter | 1 | LORCH Micor MIG 350, YOM 2015, Ser. no. 4060-2515-0008-3, welding power 350 A / 31.5 V, BasicPlus welding control unit, water cooling, dynamic control, hose package, pressure reducer, equipment trolley, without gas cylinder |
12a | MIG-MAG Welding Inverter | 1 | LORCH Micor MIG 350, YOM 2018, Ser. no. 4118-2804-0008-6, welding power 350 A / 31.5 V, BasicPlus welding control unit, water cooling, dynamic control, hose package, pressure reducer, equipment trolley, without gas cylinder |
13a | Automatic Welding Helmet | 1 | 3M Speedglas, Adflo, filters, accessories |
14a | Work Table | 1 | Self-made, welded, approx. 3,000 x 1,600 mm, wooden back panel, drilling vice, hand angle grinder, serial no. 2014 3410015 |
15a | Transport Trolley | 3 | |
16a | Workbench | 1 | 6,000 x 800 mm, 4 pull-out cabinets, 4 - 8 pull-outs, contents: various drills, open-end wrenches, ratchet boxes, screwdrivers, vice, jaw width 140 mm, two-hand drill, Bosch, type 0601462803, table stand, one-hand angle grinder, Makita, type 9558NB, Ø 125 mm, table stand |
17a | Workbench | 1 | 2,000 x 800 mm, 2 pull-out cabinets, 4 - 8 pull-outs, contents: various drills, open-end wrenches, ratchet boxes, screwdrivers |
18a | Compressed Air Hose Dispenser | 1 | AIRCRAFT SAR 10/20 RP, YOM 2020, Ser. no. 2020-402, hose length 20 + 2 m |
19a | lot of Double Steel Cabinets | 1 | 3 pcs., 1,000 x 500 x 1,800 mm, contents: various welding silicone sprays, greases, lot of storage boxes, contents: lot of screws, nuts, washers |
20a | Angle Grinder | 1 | SUHNER, Belt sander, Fein, type RS12-70 E, plastic transport box |
21a | Belt Sander | 1 | METABO TBA 1018 D, YOM 1989, Ser. no. 911294180000, aluminum sliding carriage, metal base frame, belt sanding device |
22a | Profile Steel Shears | 1 | MUBEA MIW 400, YOM 2000, Order no. MIW400/37, punching force 400 kN, material thickness max. 5 mm, foot switch for stroke release, quick-change device |
23a | Column Drilling Machine | 1 | FLOTT P30ST, Drill Ø 30 mm, tool holder M20, digital display, 2 grooving tables, 300 x 400 mm, distance spindle - table max. 97 mm, spindle speed max. 4,000 rpm, drilling depth 125 mm, throat depth approx. 270 mm |
24a | Hole Punch | 1 | MUBEA KLH 500/610, YOM 1998, hydr., Order No. KLH500/610/25, punching force 500 kN, punching Ø 30 mm, stroke max. 60 mm, throat depth 610 mm |
25 | Automatic Metal Band Saw | 1 | BERG & SCHMID GBS 250 Super HA-I Easy, YOM 2013, Ser. no. 130235001, hydr. semi-automatic, mitre left 60° / right 45°, cutting pressure feed regulator, speed 37 / 74 m/min, roller conveyor infeed, L 2,700 mm, roller conveyor outfeed, L 4,000 mm, length measuring unit 3,280 mm |
26 | lot of Material Supports | 1 | consisting of: 4 pcs. |
27 | Spray Gun Cleaning Station | 1 | B-TEC Starter 01, YOM 2015, Ser. no. 03399, compressed air hose connection |
28 | Color Metering Unit | 1 | GRACO / MERKUR, Paint gun, hose dispenser, paint mask, manufactured by 3M, type Versaflow M-200 |
29 | Suction | 1 | 2,000 x 2,000 mm, fan, piping |
30 | lot of Paint Trolleys | 1 | consisting of: 3 pcs., W 800 / 2x 2,000 mm, 13 supports each |
31 | Suspension Track System | 1 | Floor area approx. 5,000 x 10,000 mm, approx. 50 material suspension devices, manual, ceiling-mounted, increased dismantling effort, adapted to the property |
32 | Fan Heater | 2 | EUROM EK300 |
33 | Fan Heater | 2 | EUROM EK300 |
34 | Heavy Duty Shelving | 1 | 2,500 x 600 x 2,000 mm, 3 levels, wooden shelves |
35 | Platform Scale | 1 | KERN FCF, Weighing range max. 3 kg, platform 250 x 225 mm |
36 | 65" Touch Display | 1 | LEGAMASTER DIS-6500, YOM 2021, Wall bracket |
37 | Banding Machine | 1 | KALLFASS Superwrap 950 Simp., YOM 1998, Order no. K 02.98.501, roller conveyor feed, L 2,000 mm, outfeed roller conveyor, L 4,000 mm, made by Siko |
38 | Shrink Tunnel | 1 | KALLFASS Universal 950 HV, YOM 2012, Order no. VD 11.12.144, welding punch B 950 mm, passage height 400 mm, film width 920 mm, compressed air 6 bar, tunnel passage H 600 mm, roller conveyor width 800 mm |
39 | Conveying and Stacking System | 1 | SICKO, Control system, Sicko, infeed roller conveyor 800 mm, stacking portal, lifting table, function uncertain |
40 | Workshop Equipment | 1 | consisting of: 2x workbench, self-made, welded, 3,000 x 2,000 mm, 2x shelves, 2,000 x 600 x 1,000 / 3,000 x 1,200 x 1,800 mm, workbench w. top shelf, 3 levels, workbench, top light, vice, jaw width 325 mm, 2x one-hand drill, made by Fein, contents: stainless steel tube items |
41 | lot of Transport Trolleys | 1 | consisting of: 3 pcs. |
42 | lot of Transport Trolleys | 1 | consisting of: 3 pcs. |
43 | Painting Racks | 2 | 700 x 2,000 / 2,000 x 1,800 mm, without contents |
44 | Double Door Wardrobe | 1 | WÜRTH, 2-door, lockable, 4 levels, 1,000 x 500 x 2,000 mm, contents: wood screws, various versions. versions |
45 | Frame Press | 1 | POLZER EHT180, YOM 1979, Speed 1,370 rpm, panel size 1,800 x 750 mm, power 1.1 kW Drawing board, made by Alpia Besancon, type Kaliste 05 |
46 | Aluminium Folding Ladder | 1 | SIEDRA, double-sided, 7-stage, H 1,750 mm |
47 | Workshop Press | 1 | EHNERT & VOGEL, 2 punches, Festo, type DN-100-40, max. punch force 12 bar, 4 wooden blocks |
48 | Double Door Wardrobe | 1 | WÜRTH, 4 shelves, 2 pull-outs, 2-door, lockable, 1,000 x 500 x 1,800 mm, contents: item clamps |
49 | Throughfeed Milling and Profile Sanding Machine | 1 | LANGZAUNER LZK-SD, YOM 2016, Ser. no. 1190-00061, workpiece width 40 mm, feed 17 m/min, 2 units, swivel-mounted, belt sanding unit, sanding belt, 2 sanding brushes, touchscreen control, L 3,450 mm |
50 | Double Workstation | 1 | consisting of: 2x workbench, skylight, various hand tools, disk sander, Aircraft brand |
51 | Double Workstation | 1 | consisting of: 2x workbench, skylight, various hand tools |
52 | Double Workstation | 1 | consisting of: 2x workbench, skylight, various hand tools |
53 | Wide Belt Sander | 1 | BÜTFERING SCO213QC, YOM 2007, Ser. no. 0411210055, control unit, type TE14, sanding width 1,350 mm, workpiece thickness 3 mm, aperture 160 mm, 2 starting units, cross belt, sanding roller, sanding pad, vacuum table, sanding belt length 2,620 mm, belt speed max. 18 m/sec, feed max. 13 m/min |
54 | Edge Grinding Machine | 1 | LANGZAUNER LZK4, YOM 1997, Order no. J/7126, swivel range +90 to -45°, sanding belt 3,000 x 200 mm, work table, 1,250 x 400 mm, belt speed 22 m/sec, radius sanding table, 400 x 250 mm, suction nozzle, Ø 140 mm, air speed 20 m/sec |
55 | Industrial Vacuum Cleaner | 1 | NILFISK ALTO 302002904, Ser. no. 351O124509392, 2,800 W |
56 | Swivel Spindle Moulder | 1 | SCM T150, YOM 2003, Ser. no. AB/159443, swivel angle+45° to -10°, table 2,500 x 870 mm, max. speed 10,000 rpm, clamping length milling spindle 120 mm, milling arbor Ø 30 mm, spindle electr. height-adjustable / swivelable, suction Ø milling fence 120 mm / machine 120 mm |
57 | Metal Band Saw | 1 | HEMA BB315S, YOM 1970, Order no. 2570, table 400 x 400 mm |
58 | Edge Grinding Machine | 1 | SCHMID, Sanding belt width max. 150 m / length 1,050 mm, speed 22 mm/sec, table manually height-adjustable, turning device |
59 | lot of Screw Clamps | 1 | approx. 60 pcs. sizes, transport rack |
62 | Roller Band Saw | 1 | HEMA, Order no. 8596, 4 HP, blade length 5,500 mm |
63 | Column Drilling Machine | 1 | OPTIMUM Opti B26 Pro, YOM 2004, Order no. 3003263, table 280 x 280 mm, drilling capacity 25 mm, spindle holder MK3, motor 750 W, spindle speed max. 2,440 rpm, table drilling distance max. 700 mm, throat depth 210 mm |
64 | Cantilever Rack | 1 | 5,500 x 2,000 mm, 5 levels, welded, self-construction, contents: various flat and angle steels. Flat and angle steels |
66 | Horizontal Slotted Dowel Drilling Machine | 1 | HOFMANN LB760, YOM 2012, Order no. 723518, tenon length max. 220 mm, slot depth max. 150 mm, wood width max. 100 mm, interchangeable magazine, 2 punch clamping devices, cut-off saw, connection to extraction system |
67 | Metal Locker | 1 | QUIPO, 600 x 500 x 1,800 mm, 8 compartments, lockable |
68 | Pull Saw | 1 | EHVO, Saw blade Ø 600 mm |
69 | Slotting Machine | 1 | REX 54/KF, YOM 1977, Order no. 15.284, operating speed 524, max. speed 6,000 rpm, manual height adjustment of milling spindle 120 mm, handwheel, saw shaft speed 3,000 rpm, cutting width/height 510 x 127 mm, saw blade Ø 400 mm, spare saw blade |
70 | Row Drilling Machine | 1 | MMB, 18 holes in a row, 12 drilling units, drilling length 2,300 mm, hose reel, HM Müllner, Art. 33F |
71 | Drill | 1 | Self-made, consisting of: Vertical / horizontal drilling machine |
72 | Column Drilling Machine | 1 | OPTIMUM Opti B26 Pro, YOM 1999, Table 280 x 280 mm, drilling capacity 25 mm, spindle mount MK3, motor 750 W, spindle speed max. 2,440 rpm, table drilling distance max. 700 mm, throat depth 210 mm |
73 | Drilling Rig | 1 | Self-construction, consisting of: 4x horizontal drilling unit, 1x vertical drilling unit |
74 | Circular Saw | 1 | ALTENDORF F45CE, YOM 2003, Order No. 03-05-122, saw blade Ø 450 mm, control unit, scoring unit, width stop, 2 tilting stops, sliding table, parallelogram protective hood, angle stop, digital display |
76 | Diamond Saw Blades | 2 | BUKARA 403-68-1, Ø 303 mm, 72 teeth, center hole Ø 30 mm |
77 | Storage Paternoster | 1 | GWINNER Euromat 120-30-254-41, YOM 1988, Ser. no. 2179, 5,000 x 1,500 x 8,000 mm, permissible total load 120 kN, control system, type ST40MC-Control, 41 trays, contents: batch of sanding belts, batch of twist drills, increased dismantling effort, automatic system defective |
78 | Metal Strapping Tool | 1 | Hand trolley, manual locking pliers |
79 | Compartment Transport Rack | 1 | 2 compartments, 3,000 x 1,000 mm, forklift pick-up, contents: various wooden boards |
80 | Vacuum Lifter | 1 | SCHMALZ JumboErgo 85 Dummi, YOM 2004, Ser no. 2043314, 2x vacuum bell jar, extension arm, throat depth 4,000 mm |
81 | Veneer Press | 1 | OTT JU65, YOM 1977, Order no. 9685, heating plate size 1,300 x 2,500 mm, pressing force max. 1.4 kN |
82 | Climate Splitter | 1 | REMCO ML520AT, Ser. no. 702R8007, cooling capacity 5.27 kW, air conditioning compressor (exterior), increased disassembly effort |
84 | Brushing Machine | 1 | CATTINAIR ENS.DEPOUSS, YOM 2001, Conveyor belt, suction, brush width 1,200 mm |
85 | Cylindrical Rod Sander | 1 | LÖSER RS340, YOM 1981, Order no. 2090, sanding belt width max. 150 mm |
86 | Rod Cutter | 1 | LÖSER RF420, YOM 1981, Ma.-No. 700, Betr.-Std. 1.411 |
87 | Veneer Saw | 1 | MAYER MASCHINENFABRIK FH1, YOM 1977, Order no. 15000, working width 4,100 mm |
89 | Compressed Air Hose Dispenser | 1 | AIRCRAFT SAR 10/20 RP, Hose length 20 + 2 m |
90 | Wide Belt Sander | 1 | BÜTFERING AWS2, YOM 1988, Order no. 9260348, sanding height/width 150 x 1,100 mm, 2 sanding belts, sanding belt 1,110 x 1,900 mm, sanding belt speed max. 11 m/sec |
91 | lot of Screw Clamps | 1 | approx. 25 pcs., transport rack |
92 | Thicknessing Plane | 1 | BÄUERLE, Workpiece thickness max. 200 mm, table rollers manually height-adjustable |
93 | Surface Planer | 1 | FELDER AD 741, YOM 2015, Order no. 424.04.444.15, planing width 410 mm, 2 planing knives, table length 2,000 mm, max. thickness height 230 mm |
94 | Industrial Vacuum Cleaner | 1 | NILFISK ALTO Attix 995-OH MSDXC Type 22, Ser. no. 302002904, 2,800 W |
95 | Sanding Block | 1 | Bending device, made by Iseli, type S1175, order no. 92266, grinding wheel Ø 250 mm, work table |
96 | lot of Transport Trolleys | 1 | consisting of: 3 pcs. |
97 | lot of Transport Trolleys | 1 | consisting of: 4 pcs. |
99 | lot of Material | 1 | various square tubes, angle iron, stainless steel tubes |
102 | Traverse Racking System | 1 | P&K Maxirak/Titan, YOM 1996, consisting of: 10 bays, W/D/H 2,700 x 1,200 x 2,150 mm, 2 levels, contents: stair accessories: stringer brackets, ramp sleeves, transfer sleeves, support bolts |
103 | Scrubber Dryer | 1 | NILFISK ALTO SC401, YOM 2021, Ser. no. 3510212100576, area coverage 1,720 m² per hour, working width approx. 450 mm, squeegee lip |
104 | Metal Shelving Cabinets | 2 | WÜRTH, 3 levels, W 1,000 mm, contents: lot of wood screws, Würth, various types. versions |
105 | Assembly Case Stations | 2 | 500 x 500 x 1,000 mm, 9 pull-outs, 6 storage compartments, contents: 7 assembly cases, various screws, fittings |
106 | Traverse Racking System | 1 | P&K, consisting of: 3 bays, W 1x 1,800 / 2x 2,700 mm, 700 / 800 mm, H 2,200 mm, 4 levels, shelf load, 1,000 / 1,800 kg, bay load 4,000 / 7,200 kg, contents: spacers for rung shoes, wood, various versions. Versions |
107 | 65" Touch Display | 1 | LEGAMASTER DIS-6500, YOM 2021, Wall bracket |
108 | Workplace | 1 | 2,000 x 1,000 mm, contents: various covers, screws, fittings |
109 | Double Door Wardrobe | 1 | WÜRTH, W/D/H 1,200 / 500 / 1,950 mm, 11 levels, 3 pull-outs, contents: storage bins, wooden drills, various versions |
110 | Double Door Wardrobe | 1 | WÜRTH, W/D/H 1,000 / 500 / 1,950 mm, 4 shelves, 2 pull-outs, contents: lot of wood drills, various types, half-inch socket wrench set, made by Würth, hammer drill, diameter 25 mm, HSS twist drill assortment, lot of percussion drill bits, diameter 25/60 mm, 5in1 multimeter, metal detector, made by Bosch |
111 | Double Door Wardrobe | 1 | WÜRTH, W/D/H 1,000 / 500 / 1,950 mm, 4 levels, contents: lot of threaded screws |
112 | Double Door Wardrobe | 1 | WÜRTH, W/D/H 1,000 / 500 / 1,000 mm, 2 levels, 2 pull-outs, contents: batch of centering drills, holder shafts, batch of twist drills, various diameters, edge milling cutters, jigsaw blades, rivet nut pliers. diameters, edge cutters, jigsaw blades, rivet nut pliers, Hilti make |
113 | Sweeper | 1 | KÄRCHER PROFESSIONAL KM70/20C |
114 | Platform Scale | 1 | DIPSE KDSHIP, Platform size 300 x 320 mm, max. load capacity 60 kg |
115 | Office Equipment | 1 | DYMO Labelwriter 450, consisting of: Desk, 2,500 x 800 mm, 2 office swivel chairs, mobile pedestal |
116 | Film Shrink Gun | 1 | RIPACK F33185, YOM 2015, Nominal heat load 72 kW, hose package, without gas cylinder |
117 | Screw Compressor | 1 | RENNER RSF-Pro 2-30, YOM 2018, Ser. no. 836001, output 30 kW, pressure max. 10 bar, operating hours run 11,911 h / load 10,061 h, (last maintenance 08/23), refrigeration dryer, Beko, type Drypoint RA, year 2020, ser. no. 2000013640, oil-water separator, Alup, type Öwamat 4, compressed air boiler, type MB 020103-1.5000G, year 2003, volume 5,000 l, round, upright |
118 | Circular Saw | 1 | ALTENDORF F45, YOM 1993, Order No. 93-11-026, control unit, Altendorf / Elmo, sliding table, tilting fence, width stop, W 1,050 mm, parallelogram protective cover, scoring unit, saw blade Ø max. 450 mm |
119 | 5-axis CNC-Portal Machining Center | 1 | EIMA FP52, YOM 1999, Ma.No. 11491, control system, Siemens, type 840 C, 2 spindles, 2 machining tables, 2,500 x 1,500 mm, travel X/Z 6,050 x 700 mm, Y1 2,010 mm / Y2 2,010 mm, B-axis ± 135 °, C-axis ± 185 °, sawing unit, 12-position tool changer, tool holder HSK 63, max. speed: 24,000 rpm, laser workpiece alignment aid, Seifert, type SL Laser, switch cabinet, accessories: telescopic drawer cabinet, 7 drawers, contents machine accessories 24,000 rpm, laser workpiece alignment aid, manufactured by Seifert, type SL Laser, switch cabinet, accessories: telescopic drawer cabinet, 7 drawers, with contents machine accessories, vacuum clamps |
120 | 5-axis CNC-Portal Machining Center | 1 | EIMA FP52, YOM 1999, Ma.No. 11492, control system, Siemens, type 840 C, 2 spindles, 2 machining tables, 2,500 x 1,500 mm, travel X/Z 6,050 x 700 mm, Y1 2,010 mm / Y2 2,010 mm, B-axis ± 135 °, C-axis ± 185 °, sawing unit, 12-position tool changer, tool holder HSK 63, max. speed: 24,000 rpm, laser workpiece alignment aid, Seifert, type SL Laser, switch cabinet, accessories: telescopic drawer cabinet, 7 drawers, contents machine accessories 24,000 rpm, laser workpiece alignment aid, manufactured by Seifert, type SL Laser, switch cabinet, accessories: telescopic drawer cabinet, 7 drawers, with contents machine accessories, vacuum clamps |
122 | Dowel Boring Machine | 1 | MAYER MASCHINENFABRIK DBSH, Ma.-No. 21759 |
123 | Continuous Painting Line | 1 | VENJAKOB VEN Spray Perfect, YOM 2013, Ser.No. A1312001, control system, Venjakob, type EPS CNC 7000, component size max 6,000 x 1.300 x 110 mm, spraying process Air/Airmix/Airless, 3x material feed pumps for 1x water-based paint UV / 1x stain / 1x oil, 1x Airmix- / 2x Airless gun, 2x dosing pumps, 2x double membrane pumps, linear unit, 5x conveyor belts, type Ven Trans Belt / Ven Move Transfer, W 1,350 mm, L 6,340-16,800 mm, IR preheating channel, Fabr. Heraeus Nobleligth GmbH, type M 110/1548, 4x 3,250 W, 5 nozzle dryers, type Ven Dry Air Jet, L 4,160 - 7,660 mm, UV dryer, manufactured by Venjakob, type Vene Dry UV, year 2013, 2x UV lamps, 120 W each, 2x lifting tables 1.400 x 1,100 mm, supply air filter system, BerlinerLuft Klimatechnik, type RXL 30, 30,000 m³/h, 2x lifting tables 1,400 x 1,100 mm, steel cabinet, contents: machine underlays, hard wax, various colors, various hose equipment. Colors, various hose equipment |
124 | Wide Belt Grinding Machine | 1 | BÜTFERING / WEEKE Profi SWT 335/HBB, YOM 2013, Ma-No. 0-256-26-0168, feed width 1,350 mm, articulated pressure beam, operator panel, type VSE, 1x sanding station, 2x brushing units |
125 | Locker | 1 | QUIPO, 8 compartments, 600 x 600 x 1,800 mm |
127 | Workbench | 1 | 2,100 mm, 2x clamping rods, sliding door cabinet, Würth, 2-door, 4 levels |
128 | Workbench | 1 | 2,100 mm, 2x clamping rods, sliding door cabinet, Würth, 2-door, 4 levels |
129 | Circular Saw/milling Machine | 1 | FELDER KF700S, YOM 2015, Order no. 424.04.344.15, cutting length max. 3,200 mm /-width max. 1,250 mm /-height 104 mm, milling table, opening 230 mm, milling fence for tool Ø max. 230 mm, milling spindle quick-change system, extraction system |
130 | Cross-cut Saw | 1 | ALTENDORF, Order no. 77-11-148, saw blade speed 5,000 rpm, saw blade Ø 500 mm, operating hours 13,724 |
131 | Painting Racks | 2 | 12 levels, W approx. 1,300 mm |
132 | High-pressure Humidification System | 1 | FINESTFOG, YOM 2012, Control unit, motor-pump MPE01-1400-1.5 EH 1706-VH, 240 l/h, 1,400 rpm, humidity sensor, type EE 16, hygrostat PHY, high-pressure nozzle, UV disinfection |
134 | Volume | 1 | consisting of: 2x wooden shelving, 4,000 x 300 x 2,200 mm, heavy-duty shelving, 2 bays, W 2,000 mm, stand height 1,700 mm, contents: hard wax sealant, stainless steel spray, stainless steel power cleaner, parquet acrylic, construction adhesive, spirit levels, sanding belts, lots of masonry drills, 10x manual squeeze-out tools, Hilti, type HDM 500 |
135 | lot of Metal Lockers | 1 | 11x, 2-door, 1,000 x 400 x 2,000 mm, 7x, 4-door, 1,600 x 400 x 2,000 mm |
136 | Water Softener | 1 | JUDO i-Soft TGA 10, YOM 2017, Fully automatic |
137 | Cross Line Laser | 2 | WÜRTH CLL06, YOM 2007, Laser type 632 nm, laser class 2 M, range 30 m, leveling accuracy +/- 2 mm/10 m |
138 | Cross Line Laser | 2 | WÜRTH CLL06, YOM 2007, Laser type 632 nm, laser class 2 M, range 30 m, leveling accuracy +/- 2 mm/10 m |
139 | Cross Line Laser | 2 | WÜRTH CLL06, YOM 2007, Laser type 632 nm, laser class 2 M, range 30 m, leveling accuracy +/- 2 mm/10 m |
140 | Cross Line Laser | 1 | WÜRTH CLL18, Laser type 632 nm, laser class 2 M, 30 m range, leveling accuracy +/- 2 mm/10 m |
141 | Cross Line Laser | 1 | WÜRTH CLL11, original packaging, laser type 632 nm, laser class 2 M, range 15 m, leveling accuracy +/- 1.5 mm/10 m |
142 | Cross Line Laser | 1 | WÜRTH CLL11, original packaging, laser type 632 nm, laser class 2 M, range 15 m, leveling accuracy +/- 1.5 mm/10 m |
143 | Cross Line Laser | 2 | WÜRTH CLL11, Laser type 632 nm, laser class 2 M, range 15 m, leveling accuracy +/- 1.5 mm/10 m |
144 | Cross Line Laser | 2 | WÜRTH CLL11, Laser type 632 nm, laser class 2 M, range 15 m, leveling accuracy +/- 1.5 mm/10 m |
145 | Bluetooth Speaker | 1 | WÜRTH BTS 1840 |
146 | Bluetooth Speaker | 1 | WÜRTH BTS 1840 |
147 | SLR Camera | 1 | NIKON D80, Ser. no. 4044502, flash, Sigma, type EF-610DG Super, lens, Sigma, focal length 10 - 20 mm |
148 | SLR Camera | 1 | SONY Alpha 7II, Ser. no. 3789941, flash, Sigma, type EF-500DG ST, lens, Sony, focal length 28-70 mm |
149 | SLR Camera | 1 | SIGMA SD9, Ser. no. 1006107, flash, Sigma, type EF-500DG ST, tripod, lens, Sigma, focal length 24-70 mm |
150 | Laser Distance Meters | 2 | HILTI PD-I, YOM 2014 |
151 | Laser Distance Meters | 2 | HILTI PD-42, YOM 2014 |
152 | Laser Distance Meter | 1 | HILTI PD-I, YOM 2014 |
153 | Laser Distance Meter | 1 | HILTI PD-S, YOM 2014 |
154 | Laser Distance Meter | 1 | HILTI PD-E |
155 | Laser Distance Meter | 1 | HILTI PD-E, original packaging |
156 | Laser Distance Meter | 1 | LEICA Disto A3 |
157 | Measuring Apparatus | 1 | BREITHAUPT, Measuring laser, Leica, type DistoMemo, without software |
158 | Measuring Apparatus | 1 | BREITHAUPT, Measuring laser, Leica, type DistoMemo, without software |
159 | Bandsaw | 1 | METABO BS 0633, YOM 1981, Ser. no. 14604733000, saw blade L 2,230 mm, cutting height max. 160 mm, side clearance 330 mm, saw blade speed 135 m/min |
160 | Lathe | 1 | KILLINGER KM2500, YOM 1980, Order no. 1638, spindle speed max. 2,900 rpm, tailstock, center height/width 255 x max. 1,120 mm |
161 | Column Drilling Machine | 1 | KRENN SB25/12E, Ser. no. 28662, table 230 x 230 mm, drilling capacity 25 mm, max. speed 2,580 rpm, max. drilling distance 760 mm, throat depth 160 mm |
162 | Combination Sanding Machine | 1 | TORMEK SA-250, Speed 70 rpm |
163 | lot of Hand Tools | 1 | consisting of: belt sander, make Festool, BS 75 E, two-hand drill, make Fein, jigsaw, make Festool, type PS 300 EQ, duo doweler, make Mafell, type DD40, router, make Makita, type RP110C |
164 | lot of Hand Tools | 1 | consisting of: router, make Makita, type RT 0700ZX2J,, duo doweler, make Mafell, type DD40, hand-held circular saw, make Makita, type SP1600, two-hand drill, make Fein |
165 | lot of Hand Tools | 1 | consisting of: wood connector router, make Würth Master, type HVF710, jigsaw, make Festool, type S420EBQ, router, make Würth Master, type OF 1100-E, belt sander, make Festool, type BS 75 E, satin finishing machine, Würth Master, type SM 100, one-hand drill, Kress, type 850 SB-2 |
166 | lot of Hand Tools | 1 | consisting of: jigsaw, Würth Master, type STP 110-BS, belt sander, Festool, type BS-75, router, Makita, type RP2300FC, wood connector cutter, Lamello, type Top 10, one-hand drill, Fein |
167 | lot of Hand Tools | 1 | consisting of: router, Makita, type RT 0700C, wood connector cutter, Lamello, type Top 10, belt sander, Festool, BS-75, router, Makita, type 3708FC, drill, Makita, type HP2030 |
168 | lot of Hand Tools | 1 | consisting of: wood connector cutter, Würth Master, type HFV710S, Router, Makita, type 3708FC, belt sander, Bosch, type GVS 350 AE, one-hand drill, Fein, type BOP10 |
169 | lot of Hand Tools | 1 | consisting of: 2x router, Makita, type 3708FC, belt sander, Bosch, type GVS 350 AE, one-hand drill, Fein |
170 | lot of Hand Tools | 1 | consisting of: belt sander, Festool, BS 75 E, two-hand drill, Fein, jigsaw, Festool, type PS 300 EQ, duo-dübler, Mafell, type DD40, router, Makita, type RP110C |
171 | LED-Spotlight | 3 | 3 pcs, 2x Würth factory, 1x Jo-el factory |
172 | Electrical Tester | 1 | BEHA Amprob Telaris 0701/0702, Transport case |
173 | Radiant Heater | 2 | EUROM, 3000 W |
174 | Radiant Heater | 2 | EUROM, 3000 W |
175 | TIG Welding Machine | 1 | LORCH H 180 t, Welding current 130 A, hose package, transport case |
176 | Electrode Welder | 1 | LORCH Handy S 20, Welding current 150 A, transport case |
177 | Electrode Welder | 1 | WÜRTH MASTER ESI 130 Handy, Welding current 130 A, transport case |
178 | Electrode Welder | 1 | LORCH Handy S 10, Welding current 150 A, transport case, welding mask |
179 | Weld Seam Cleaning Device | 1 | WÜRTH Welnox 1, Transport case |
180 | Electrode Welder | 1 | LORCH Handy S 10, Welding current 150 A, transport case, welding mask |
181 | Electrode Welder | 1 | LORCH Handy S 20, Welding current 150 A, transport case, welding mask |
182 | Electrode Welder | 1 | WÜRTH MASTER ESI 130 Handy, Welding current 130 A, transport case |
183 | Electrode Welder | 1 | LORCH Handy S 10, Welding current 150 A, transport case |
184 | Impact Drill | 1 | HILTI TE-40AVR, Transport case |
185 | Cordless Impact Drill | 1 | WÜRTH MASTER ABH 20-SLE, Transport case |
186 | Impact Drill | 1 | HILTI TE-75 |
187 | Angle Drill | 1 | HILTI TE-7 C, Transport case |
188 | Circular Handsaw | 1 | FESTOOL TS75 EBQ-Plus, new, transport case, jigsaw, Festool, type PS 300 EQ, new, transport case |
189 | Hand Polishing Machine | 1 | FLEX XC3401 VRG, Speed max. 480 rpm, transport bag |
190 | lot of Hand Tools | 1 | consisting of: wood connector milling machine, make Würth Master, type HVS 710-S, jigsaw, make Festool, type PS200E, hand-held circular saw, make Würth, type TKS59-E, belt sander, make Holzher, type 24100000 |
191 | lot of Electrical Hand Tools | 1 | consisting of: hand-held circular saw, make Würth Master, type TKS59E, electric sanding file, make Würth Master, type ESF500, wood connector milling machine, make Würth Master, type HVS 710-S |
192 | lot of Electrical Hand Tools | 1 | consisting of: wood connector milling machine, make Würth Master, type HVS 710-, hand-held circular saw, make Würth Master, type TKS55-, jigsaw, make BTI, type STS85PA, belt sander, make Bosch, type GBS75AE |
193 | lot of Electrical Hand Tools | 1 | 6x one-hand drills, Fein / Kress, 4x two-hand drills, Fein / Würth / Atlas Copco, 2x electric impact wrenches, Makita, 2x one-hand angle grinders, Makita, construction spotlights |
194 | lot of Electrical Hand Tools | 1 | consisting of: crosscut and pull saw, make Würth, type KGS270-60E, multi-tool, make Fein, type Multimaster, one-hand angle grinder, make Hilti, type DCG126S, router, make Makita, impact drill, make Hilti, type TE56, cross line laser, make Würth, CLL 11, tripod, belt sander, make Würth, type HBS 533, jigsaw, make Festool, type BS300, hand-held circular saw, make Festool, type TS55RIBQ-Plus, guide rail, electric planer, make Makita, type N1923B, LED spotlight, make Würth, industrial vacuum cleaner, make Nilfisk, type Aero21Inox |
195 | lot of Electrical Hand Tools | 1 | consisting of: crosscut and miter saw, make Würth, type KGS270-60E, multi-tool, manufacturer Fein, type Multimaster, one-hand angle grinder, manufacturer Hilti, type DCG126S, angle drill, manufacturer Fein, cross-line laser, manufacturer Würth, CLL 11, tripod, belt sander, manufacturer Bosch, type GBS75AE, hand-held circular saw, manufacturer Festool, type TS55RIBQ-Plus, guide rail, electric planer, manufacturer Makita, type N1923B, LED spotlight, manufacturer Würth, industrial vacuum cleaner, manufacturer Nilfisk, type Aero21Inox |
196 | lot of Electrical Hand Tools | 1 | consisting of: miter and pull saw, manufacturer Würth, type PS270 +/- 45°, multi-tool, manufacturer Fein, type Multimaster, angle drill, manufacturer Fein, belt sander, manufacturer Festool, type BS75E, electric planer, manufacturer BTI, type HA 40-82, industrial vacuum cleaner, Nilfisk, type Aero21Inox, router, Makita, jigsaw, Festool, type PS 420EBQ, one-hand drill, Kress, type 850 BM-2, impact drill, Hilti, type TE60 |
197 | lot of Electrical Hand Tools | 1 | consisting of: Kapp- und Zugsäge, Fabr. Würth, Typ KGS270-60E, mit Gehrungsschnitt +/- 45°, Multitool, Fabr. Fein, Typ Multimaster, Winkelbohrmaschine, Fabr. Fein, Bandschleifer, Fabr. Skil, Oberfräse, Fabr. Makita, Typ 3704, Stichsäge, Fabr. Makita, type 4341FCT, one-hand drill, Hilti, impact drill, Hilti, type TE60+J357, cross-line laser, Würth, CLL 11, tripod, portable circular saw, Festool, type TS55RIBQ-Plus, guide rail |
198 | Chop and Pull Saw | 1 | WÜRTH PS270, YOM 2010, Ser. no. ...46270 |
199 | Chop Saw | 1 | MAKITA LLC1230, YOM 1999, Saw blade Ø 305 mm |
200 | Ladders Post | 1 | consisting of: Aluminium folding ladder, 8 steps, aluminum extension ladder, two-part, 13 steps each |
204 | lot of Construcion Stairs | 1 | TREPPENMEISTER, approx. 1,000 steps, handrail posts, connecting pieces, stair scaffolding |
205 | lot of Construcion Stairs | 1 | TREPPENMEISTER, approx. 1,000 steps, handrail posts, connecting pieces, stair scaffolding |
206 | lot of Construcion Stairs | 1 | TREPPENMEISTER, approx. 1,000 steps, handrail posts, connecting pieces, stair scaffolding |
207 | Forklift Crane | 1 | RMS KAT 5.0, Ser. no. S235JRSZ, load capacity 1,000 - 5,000 kg, max. outreach 500 - 1,800 mm, collection at a later date, by appointment |
208 | Lot Euro Pallets | 1 | approx. 150 pcs. |
209 | lot of Mesh Boxes | 1 | approx. 10 pcs. |
210 | Construction Stairs | 1 | Wood, 6/7/13/14 tiers, approx. 40 pcs. |
211 | lot of Construcion Stairs | 1 | approx. 800 steps, handrail posts, connectors, stair scaffolding |
213 | Mesh Pallet Stacking Frame | 1 | approx. 50 pcs. |
214 | Hot Water High-pressure Cleaner | 1 | KÄRCHER HDS 995, YOM 2000, Pump pressure 170 bar, water flow rate up to 918 l/h, suction height 1,800 mm, water heating hot water/steam 64 K x 119 K, function uncertain, spare parts carrier |
216 | Aluminium Extension Ladder | 1 | 2-part, each with 12 steps |
217 | Aluminium Extension Ladder | 1 | 2-part, each with 13 steps |
218 | Ladders | 2 | each 13-stage |
219 | Ladders Post | 1 | consisting of: Aluminium folding ladder, Siedra, 8-step, aluminum extension ladder, Siedra, 2-part, 12-step each |
220 | lot of Aluminium Ladders | 1 | consisting of: Scaffold ladder, Siedra, 3x 4-steps, extension ladder, 2x 6-steps |
221 | lot of Aluminium Ladders | 1 | consisting of: Aluminium step, 3-step, aluminum folding ladder, 8-step |
222 | lot of Aluminium Ladders | 1 | consisting of: Aluminium folding ladder, Siedra, 8 steps, aluminum extension ladder, 2-part, 12 steps each |
223 | lot of Aluminium Ladders | 1 | consisting of: Aluminium folding ladder, Siedra, 8-step, aluminum extension ladder, 2-part, each with 13 steps |
224 | lot of Aluminium Ladders | 1 | consisting of: Aluminium folding ladder, Siedra, 8-step, aluminum extension ladder, 2-part, each with 13 steps |
225 | Aluminium Extension Ladder | 1 | 13-stage |
226 | Tiered Transport Trolleys | 2 | |
227 | Tiered Transport Trolleys | 2 | |
228 | Tiered Transport Trolleys | 2 | |
229 | Tiered Transport Trolleys | 2 | |
230 | Feeding and Stacking Aid | 1 | R. BECK MASCHINENBAU, YOM 1997, Order no.: 126, max. load 1,300 kg, electrical connection 400 V, max. lifting height 1,600 mm |
231 | Feeding and Stacking Aid | 1 | FABA HY-HB, YOM 2002, Lifting height 1,555 mm, max. load capacity 1,000 kg, function uncertain |
232 | Lift Truck | 1 | HANSELIFTER HPT-AC 25AR, YOM 2021, Ser. no.: 2109-BE042508-283, load capacity 2,500 kg |
233 | Pallet Truck | 1 | STILL HP 22, YOM 2000, Ser. no.: 104059/962507/Steel, max. load capacity 2,200 kg |
234 | Pallet Truck | 1 | OSWALD OSE2500, YOM 2019, Ser. no.: V1900783, max. load capacity 2,500 kg |
235 | Pallet Truck | 1 | STILL HP22, Ser. no.: 101041/45T055/Still, max. load capacity 2,200 kg |
236 | Pallet Truck | 1 | STILL HP22, YOM 2000, Ser. no.: 104059/952507-Still, max. load capacity 2,200 kg |
237 | Pallet Truck | 1 | FRANZ KAHL HP20, YOM 2001, Ser. no.: 20/92276, max. load capacity 2,000 kg |
238 | Pallet Truck | 1 | HANSELIFTER HPT-AC 25AR, YOM 2021, max. load capacity 2,500 kg |
239 | Pallet Truck | 1 | WAGNER HP20, Ser. no.: 20/337561, max. load capacity 2,000 kg |
240 | Pallet Truck | 1 | HANSELIFTER HPT-AC 25AR, YOM 2021, max. load capacity 2,500 kg |
241 | Pallet Truck | 1 | BAKA GH2031, YOM 1992, max. load capacity 2,000 kg |
242 | Pallet Truck | 1 | YOM 2004, Ser. no.: A294177, max. load capacity 2,000 kg |
243 | Electric Pallet Truck | 1 | YALE MS10AC, YOM 2016, Ser. no.: C846T0416P, max. load capacity 1,000 kg, max. lifting height 3,030 mm, operating hours 136, with charger, Horker, 24 V, 25 A |
244 | Electric Pallet Truck | 1 | YALE MS16, YOM 2016, Ser. no.: D852T01907P, max. load capacity 1,600 kg, max. lifting height 4,430 mm, operating hours 148, with charger, Horker, 24 V, 45 A, later release from approx. October 2024 by telephone agreement |
245 | Electric Pallet Truck | 1 | HYSTER PC1.5, YOM 2021, Ser. no.: A6W9M05118V, max. load capacity 1,500 kg, 48 V, integrated charger |
246 | Pallet Truck | 1 | STILL HP S25, YOM 2014, Ser. no.: ST14080275, max. load capacity 2,500 kg |
247 | Pallet Truck | 1 | HANSELIFTER HPT A25PTP, YOM 2015, max. load capacity 2,500 kg |
248 | Stair Climbing Sack Truck | 1 | |
251 | Sabre Saws | 2 | WÜRTH SBS1100-E, YOM 2014 |
255 | Circular Handsaw | 1 | FESTOOL TS75, YOM 2022, Ser. no. 40200538, saw blade Ø 210 mm |
256 | Circular Handsaw | 1 | FESTO AT65EB, Ser. no. 18292, saw blade Ø 160 mm |
257 | Circular Handsaw | 1 | FESTO AT65EB, Ser-No. 18621, saw blade Ø 160 mm |
258 | Moisture Meter | 1 | GANN Hydromette H35 |
259 | lot of Electrical Hand Tools | 1 | consisting of: Belt sander, Würth make, type HBS533, wood connector milling machine, Lamello make, type Minispot, cable drum, Elektron make, 40,000 mm, construction spotlight |
261 | Trailer | 1 | HUMBAUR Koffer TA G VD RA-RI, YOM 2015, GVW 2,500 kg, ID no. WHDK2542BL1005047, registration no. 09/2015. Equipment: closed box. Damage: unknown. Documents: Vehicle registration document |
262 | Trailer | 1 | HUMBAUR Koffer TA G VD RA-RI, YOM 2015, GVW 2,500 kg, ID no. WHDK2542BL1005048, registration no. 09/2015. Equipment: closed box. Damage: unknown. Documents: Vehicle registration document |
263 | Car | 1 | VOLKSWAGEN Golf VII Variant, YOM 2016, Diesel, EURO 6, 81 kW, cubic capacity 1,598 cm³, ID no. WVWZZZAUZHP536770, registered 07/2016, approx. 285,000 km, MOT 11/25. Equipment: 5-seater, partial leather interior, automatic, multifunction steering wheel, massage function driver's seat, complete winter tyres, navigation system, swivelling trailer coupling, automatic air conditioning. Damage: unknown. Documents: Vehicle registration document and vehicle licence |
264 | Car | 1 | VOLKSWAGEN Golf VII Variant, YOM 2016, Diesel, EURO 6, 110 kW, cubic capacity 1,968 cm³, ID no. WVWZZZAUZHP549247, EZ 07/2016, 265,260 km, 09/25. Equipment: 5-seater, partial leather interior, massage function driver's seat, automatic, multifunction steering wheel, complete winter tyres, navigation system, swivelling trailer coupling, automatic air conditioning. Damage: unknown. Documents: Vehicle registration document and vehicle licence |
265 | Car | 1 | VOLKSWAGEN Golf VII, YOM 2019, Diesel, EURO 6, 85 kW, cubic capacity 1,598 cm³, ID no. WVWZZZAUZKW219777, EZ 04/2019, 104,000 km, HU 10/24. Equipment: 5-seater, 5-speed manual gearbox, multifunction steering wheel, automatic air conditioning, navigation system, sunroof, swivelling trailer coupling, complete winter wheels. Damage: unknown. Documents: Vehicle registration document and vehicle licence |
266 | Car | 1 | VOLKSWAGEN Golf VII, YOM 2014, Diesel, EURO 6, 81 kW, cubic capacity 1,568 cm³, ID no. WVWZZZAUZFW288036, EZ 10/2014, km unknown, HU 04/24. Equipment: 5-seater, 5-speed manual gearbox, automatic air conditioning, swivelling trailer coupling, complete winter wheels. Damage/defects: Battery deeply discharged, heavy soiling on the outside. Documents: Vehicle registration document and vehicle licence |
267 | Car | 1 | VOLKSWAGEN Golf VII, YOM 2013, Diesel, EURO 6, 110 kW, cubic capacity 1,968 cm³, ID no. WVWZZZAUZDW145737, EZ 03/2013, 202,000 km, HU 08/24. Equipment: 5-seater, 6-speed manual gearbox, air conditioning, swivelling trailer coupling, complete winter wheels. Damage: Hail damage to roof and bonnet. Documents: Vehicle registration document and vehicle licence |
268 | Car | 1 | VOLKSWAGEN Golf VII, YOM 2016, Diesel, EURO 6, 81 kW, cubic capacity 1,598 cm³, ID no. WVWZZZAUZHW030187, EZ 05/2016, 201,600 km, HU 12/25. Equipment: 5-seater, 5-speed manual gearbox, partial leather interior, air conditioning, massage function driver's seat, swivelling trailer coupling, complete winter wheels. Damage: Battery deeply discharged. Documents: Vehicle registration document and vehicle licence |
269 | Car | 1 | VOLKSWAGEN Golf VII Variant, YOM 2017, Diesel, EURO 6, 85 kW, cubic capacity 1,598 cm³, ID no. WVWZZZAUZHP778027, EZ 01/2017, 299,000 km, HU 05/24. Equipment: LED headlights, 5-seater, 5-speed manual gearbox, multifunction steering wheel, automatic air conditioning, massage function driver's seat, swivelling trailer coupling, complete winter wheels. Damage: Graze damage front right, hail damage roof, service due. Documents: Vehicle registration document and vehicle licence |
270 | Car | 1 | VOLKSWAGEN Golf VII Variant, YOM 2016, Diesel, EURO 6, 110 kW, cubic capacity 1,968 cm³, ID no. WVWZZZAUZHP540125, registered 07/2016, approx. 180,000 km, MOT 05/24. Equipment: 5-seater, automatic transmission, partial leather interior, massage function driver's seat, multifunction steering wheel, automatic air conditioning, navigation system, swivelling trailer coupling, LED headlights, complete winter wheels. Damage: Front damage, bonnet, mudguards, service due. Documents: Vehicle registration document and vehicle licence |
271 | Van | 1 | MERCEDES-BENZ Citan, YOM 2015, Diesel, EURO 6, 81 kW, cubic capacity 1,461 cm³, ID no. WDF4156051U168772, DD 5/2015, approx. 85,000 km, MOT 02/24. Equipment: 2-seater, 6-speed manual gearbox, air conditioning, load compartment partition, complete winter tyres, sliding door, rear wing door, trailer coupling. Damage: Battery deeply discharged, hail damage to roof. Documents: Vehicle registration document and vehicle licence |
272 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2020, Diesel, EURO 6, 120 kW, displacement 2,143 cm³, ID no. WIV9076371P322491, EZ 10/2020, 101,000 km, HU until 02/25. Equipment: 2-seater, 6-speed manual gearbox, automatic air conditioning, multifunction steering wheel, load compartment partition, trailer coupling, storage system, Fami, contents: item screws, hand tools. Damage: unknown. Documents: Vehicle registration document and vehicle |
273 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2020, Diesel, EURO 6, 120 kW, cubic capacity 2,143 cm³, ID no. WIV9076371P321680, EZ 10/2020, 98,000 km, HU 01/25. Equipment: 2-seater, 6-speed manual gearbox, automatic air conditioning, multifunction steering wheel, trailer coupling, load compartment partition, storage system, Fami, contents: item screws, hand tools. Damage: unknown. Documents: Vehicle registration document and vehicle licence |
274 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2020, Diesel, EURO 6, 120 kW, displacement 2,143 cm³, ID no. WIV9076371P322490, EZ 10/2020, km unknown, HU 01/25. Equipment: 2-seater, 6-speed manual gearbox, automatic air conditioning, multifunction steering wheel, trailer coupling, load compartment partition, storage system, Fami, contents: item screws, hand tools. Damage: dents in sill and passenger door, damage to roof edge, dent rear / passenger side, battery deeply discharged. Documents: Vehicle registration document and vehicle licence |
275 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2020, Diesel, EURO 6, 120 kW, displacement 2,143 cm³, ID no. WIV9076371P303090, EZ 10/2020, 85,000 km, HU 02/25. Equipment: 2-seater, 6-speed manual gearbox, automatic air conditioning, multifunction steering wheel, trailer coupling, load compartment partition, storage system, Fami, contents: item screws, hand tools. Damage: unknown. Documents: Vehicle registration document and vehicle licence |
276 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2016, Turbo diesel, EURO 6, 120 kW, cubic capacity 2,143 cm³, ID no. WDB9066371P552676, registration no. 12/2016, 140,000 km, MOT 11/25. Equipment: 2-seater, 6-speed manual gearbox, air conditioning, multifunction steering wheel, trailer coupling, load compartment partition, storage system, Fami, contents: item screws, hand tools. Damage: Hail damage to roof. Documents: Vehicle registration document and vehicle licence were available |
277 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2020, Diesel, EURO 6, 120 kW, displacement 2,143 cm³, ID no. WIV9076371P322489, EZ 10/2020, 98,000 km, HU 01/25. Equipment: 2-seater, 6-speed manual gearbox, automatic air conditioning, multifunction steering wheel, trailer coupling, load compartment partition, storage system, Fami, contents: item screws, hand tools. Damage: dents and scratches. Documents: Vehicle registration document and vehicle licence |
278 | Van | 1 | MERCEDES-BENZ Sprinter, YOM 2020, Diesel, EURO 6, 120 kW, cubic capacity 2,143 cm³, ID no. WIV9076371P322492, EZ 10/2020, 65,000 km, HU 01/25. Equipment: 2-seater, 6-speed manual gearbox, automatic air conditioning, multifunction steering wheel, trailer coupling, load compartment partition, storage system, Fami, contents: item screws, hand tools. Damage: unknown. Documents: Vehicle registration document and vehicle licence |
279 | Trailer | 1 | AUWAERTER PAUL GL75, YOM 1991, Payload 599 kg, GVW 750 kg, Ident-No. 93005, EZ 12/1991, HU 03/25. Damage: unknown. Documents: Vehicle registration document |
281 | Conference Table | 1 | 3,000 x 1,000 mm, wenge / beech insert, plus: 6 cantilever chairs, anthracite synthetic leather |
282 | LED-TV | 1 | GRUNDIG, approx. 55'', wall bracket, remote control |
283 | lot of Furniture | 1 | consisting of: Sideboard, wenge, 1,800 x 400 x 800 mm, 2 chairs, kitchen island, 2 levels, 2 pull-outs, 1,550 x 550 x 900 mm, desk, wenge, 1,200 x 600 x 720 mm, 4x high-back chairs |
284 | Sideboard | 1 | 1,500 x 550 x 900 mm, 2 doors, lockable |
285 | Franking Machine | 1 | FRANKO POSTALIA Postbase, with letter scale |
286 | Multifunction Printer | 1 | EPSON Workforce Pro WF-5620, Original sheet feeder, 2x paper trays |
287 | 27" TFT Monitors | 2 | IIYAMA Prolite B2780HSU, Keyboard |
289 | Office Equipment | 1 | consisting of: Desk, electrically height-adjustable, 2,300 x 1,010 mm, office pedestal, 4 pull-outs, meeting table, 2,000 x 1,000 mm, 3 office swivel chairs, whiteboard, 2,000 x 1,000 mm, 4x filing shelves, 2-6 levels, 5 hanging file drawers, beech, bench, rocker function |
290 | Multifunction Printer | 1 | EPSON Workforce Pro WF-C5790 BA, Original sheet feeder, 3x paper trays |
291 | 27" TFT Monitors | 2 | IIYAMA Prolite B2780HSU, Keyboard, mouse |
292 | 27" TFT Monitors | 2 | IIYAMA Prolite B2780HSU / Prolite XUB2792HSU, Wireless keyboard, wireless mouse |
293 | 27" TFT Monitors | 2 | IIYAMA Prolite B2780HSU, Keyboard, mouse |
295 | Multifunction Printer | 1 | EPSON Workforce Pro WF-C5790 BA, Original sheet feeder, 3x paper trays, 27'' TFT monitor, Iiyama, Prolite XUB2792 HSU |
296 | 27" TFT Monitors | 2 | IIYAMA Prolite XUB2792 HSU, Keyboard, mouse |
297 | 27" TFT Monitors | 2 | IIYAMA Prolite 82780HSU, Keyboard, mouse |
298 | 3D Laser Measurement System | 1 | FLEXIJET 3D, YOM 2020, Ser. no. FJ-000564, consisting of: Laser measuring system, remote control, charger, safety goggles, W-Lan stick, transport case, tripod, tablet PC, software, type Flexi-CAD, without data sets |
299 | Office Equipment | 1 | consisting of: 2 free-form desks, 2,000 x 1,000 mm, electr. height-adjustable, desk, 1,500 x 780 mm, 2 desks, 1,800 x 800 mm, 4 mobile pedestals, 4 pull-outs, 4 office swivel chairs, whiteboard, 2,000 x 1,000 mm, pedestal fan |
300 | Office Equipment | 1 | consisting of: 5 trapezoidal tables, 760 / 700 x 550 mm, 3x cantilever chair, 2x office swivel chair, whiteboard |
301 | Multifunction Printer | 1 | EPSON Workforce Pro WF-5620, Original sheet feeder, 2x paper trays |
302 | 27" TFT Monitors | 2 | IIYAMA Prolite XUB2792 HSU |
303 | 24" TFT Monitors | 2 | LG 24MB56 |
304 | 27" TFT Monitors | 2 | IIYAMA Pl2792H, Wireless keyboard, wireless mouse |
307 | 27" TFT Monitors | 2 | IIYAMA ProLite 82780HSU / XUB2790 HSB, Keyboard, mouse |
308 | 27" TFT Monitors | 2 | IIYAMA ProLite 82792HSU, Keyboard, mouse |
309 | 27" TFT Monitors | 2 | IIYAMA ProLite 82792HSU, Keyboard, mouse |
310 | Office Equipment | 1 | consisting of: 3 desks, 2,000 x 800 mm, electr. height-adjustable, 4 mobile pedestals, 4 pull-outs, 4 office swivel chairs, kitchen island, 1,500 x 600 x 780 mm, wenge, 2 pull-outs, wall shelf, 600 x 400 mm, filing cabinet, 4-door, 5 levels |
311 | 65" Touch Display | 1 | LEGAMASTER DIS-6500, YOM 2021, Wall bracket, 2x loudspeaker, made by Logitec |
312 | 27" TFT Monitors | 2 | IIYAMA Prolite XUB2792 HSU, Keyboard |
313 | lot of Conference Chairs | 1 | 8 pieces, Polser, black, whiteboard |
314 | 86" Touch Display | 1 | LEGAMASTER DIS-86, YOM 2021, Ser. no. DES860021030024, remote control, 2 speakers, Logitec, Rallye Speaker type, Ser. no. 204GGR06N8, display hub, Logitec, tablet hub |
315 | Interior Design | 1 | consisting of: Meeting table: 9 trapezoidal tables, 23 stacking chairs, 5,000 x 1,022 mm, flipchart, pin board, mobile |
316 | Free-form Desks | 3 | electr. height-adjustable, 5x office swivel chairs |
317 | Plotter | 1 | CANON imagePROGRAF TM-200, Model K10490 |
318 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
319 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
320 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
321 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
322 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
323 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
324 | Acoustic Panels | 2 | ACUSTIO, Felt cover, W/H 1,200 x 1,600 mm |
325 | 27" TFT Monitors | 4 | IIYAMA Prolite B2780 HSU |
326 | Interior Design | 1 | consisting of: Meeting table, 3,000 x 2,500 mm, 3-section, 9 chairs, 2 pin boards, rollable, table, 1,000 x 800 mm, filing cabinet, 2,000 x 400 x 2,200 mm, 4-door, 2 compartments open, 3 levels |
327 | Dining Table | 1 | Ø 1,600 mm |
328 | 27" TFT Monitors | 2 | IIYAMA PL2792 H, Keyboard |
330 | Meeting Tables | 1 | 8 pcs., approx. 30x stacking chairs, various designs versions |
331 | lot of Railing | 1 | Metal/stainless steel, var. Versions, L 580 - 1,000 mm |
332 | lot of FRM Screws | 1 | various types |
333 | lot of Heavy-duty Anchors | 1 | FISCHER/HILTI, various types |
334 | lot of Stone Drills | 1 | HILTI, various. versions, Ø 5/10/12/14/15/16, new |
335 | lot of Railing | 1 | sub. versions, L 580 - 1,000 mm, various colors colors |
336 | lot of Wood | 1 | consisting of: 6 panels, L/W/H 5,000 x 700 x 45 mm, color Hevea |
337 | lot of Wood | 1 | consisting of: 11 panels, L/W/H 5,000 x 700 x 45 mm, color walnut |
338 | lot of Wood | 1 | consisting of: 3 panels, L/W/H 6,000 x 680 x 45 mm, color beech |
339 | lot of Wood | 1 | consisting of: approx. 15 panels, L/W/H 5,000 x 700 x 45 mm, color walnut |
340 | lot of Wood | 1 | consisting of: 16 panels, L/W/H 5,000 x 700 x 45 mm, color mocha |
341 | lot of Wood | 1 | consisting of: 5.5 panels, L/W/H 5,000 x 700 x 45 mm, color cherry |
342 | lot of Wood | 1 | consisting of: 11 panels, L/W/H 5,000 x 700 x 45 mm, 1 panel, L/W/H 4,000 x 700 x 45 mm, color walnut |
343 | lot of Wood | 1 | consisting of: 10 panels, L/W/H 5,000 x 700 x 45 mm, 1 panel, L/W/H 1,400 x 700 x 45 mm, color acacia |
344 | lot of Handrails | 1 | consisting of: various different versions, different types of wood |
345 | Shelf Contents | 1 | consisting of: Wood sections, various types of wood types of wood, various finishes |
346 | lot of Wood Blanks | 1 | consisting of: various different types of wood, different finishes, round bars |
347 | Flagpoles | 3 | Aluminium, H approx. 5,000 mm |
348 | Charger | 1 | AEG LW 60.0, Ser. no. 4500021232, Input: 220 - 240 V, Output: 12 / 24 V, Sart function 540 A |