Online Auction Allgaier Automotive GmbH: Lot Listing
Bids until Thursday, February 05, 2026
398 Available Lots:
| Lot | Description | Amount | Details |
|---|---|---|---|
| 1 | Workbench | 1 | Wood/metal, base cabinet 5 drawers, 2 door elements, 2 strapping machines, sealing pliers |
| 2 | Double-girder Bridge Crane | 1 | TAUCHER, Max. load capacity 50 t, span 17 m, radio remote control |
| 3 | Horizontal Sheet Metal Transport Cart | 1 | Metal, 2 tool cabinets, metal |
| 4 | Column Drilling Machine | 1 | ALZMETALL AB45S, YOM 1987, Serial no. 1451, max. speed 1,280 rpm, max. feed 0.22 mm/rev, quill travel 180 mm, drill vise |
| 5 | Light Inspection Unit | 1 | SURFACE CONTROLS LPS50480, Consisting of 12 light panels, serial no. 103490, steel construction, accessories |
| 6 | Workbench | 1 | Wood/metal, base cabinet 4 drawers, 1 door element, 2 desks, 3 swivel chairs, floor transport cart, rubber-tired |
| 7 | Pallet Rack | 1 | 12 linear meters, metal, upright height 3,000 mm, 3 levels, bay load max. 9,600 kg |
| 8 | Industrial Vacuum Cleaner | 1 | ESTA Durosorg-W, YOM 1990 |
| 9 | 3D Measuring System | 1 | GOM Atos Triple Scan, YOM 2016, Serial no. 180808, measuring software GOM Inspect Pro from 2022, measuring and evaluation unit, measuring stand, manufacturer Foba, mobile, 2 accessory cases with probe and calibration plate, surface plate, 4,000 x 2,500 mm |
| 10 | 3D Coordinate Measuring Machine | 1 | MITUTOYO Euro Apex 122010, YOM 1999, Serial no. N0007905, measuring range X/Y/Z 1,200 x 2,000 x 1,000 mm, table size 3,000 x 1,500 mm, control unit, measuring interface, measuring head, manufacturer Renishaw, type PH10M, calibration mandrel with case, accessories, measuring software Metrolog |
| 11 | Surface Plate | 1 | STIEFELMAYER, 4,000 x 2,000 mm |
| 12 | Horizontal Arm Measuring Machine | 1 | COORD3 SWAN L 501618, YOM 2001, Serial no. 397901356, measuring range X/Y/Z 5,000 x 1,600 x 1,800, 2 measuring arms, touch probes, manufacturer Renishaw, type PHC10-2, operator console ME 670 / ME 471, 2 PC units, 4 monitors, measuring software Metrolog, calibration mandrel |
| 13 | Tool Cabinets | 5 | Metal, 2-door, contents: machine accessories |
| 14 | Drawer Cabinets | 2 | LISTA, Metal, 8 drawers, 1 steel cabinet 2-door, gray, contents: 3 torque wrenches 5–120 Nm, quick probe, gauge pins 1–10 mm, 1 set outside micrometers 0–100 mm, 4-piece, gauge block set 85-piece (incomplete), 2 compressed-air hand tools, magnetic dial indicator holder, Witte clamping system elements |
| 15 | Workbench | 1 | Wood/metal, vise, contents: hand tools, accessories, 2 tool cabinets, 2-door, metal |
| 16 | Tool Cabinets | 4 | Metal, 2-door, contents: 6 electric hand tools, electric scale |
| 17 | Digital Platform Scale | 1 | KERN EOB35K20, Weighing range max. 35 kg, base frame |
| 18 | Table Trolley | 2 | FETRA, Table size 1,200 x 800 mm |
| 19 | Single-girder Bridge Crane | 1 | HAISCH, Max. load capacity 5 t, span 7 m, floor control |
| 20 | Single-girder Bridge Cranes | 2 | HAISCH, Max. load capacity 5 t, span 7 m, floor control |
| 21 | Electric High-lift Stacker | 1 | STILL EGV-16, YOM 2000, Serial no. 710246003356, max. load capacity 1,600 kg, charger 24V 40A |
| 22 | Portal Milling Machine | 1 | DROOP + REIN T2540R50E, YOM 2000, Serial no. 01540, control, manufacturer Fidia, type C20/M30, travel X/Y/Z 5,000 x 3,000 x 1,950 mm, 5 axes, tool holder SK 50, table size 5,000 x 3,500 mm, spindle speed 6,000 rpm, 60-position tool changer, measuring device, manufacturer Braankamp, safety light curtains, 1 workbench, 3 drawer cabinets, 3 WTS carts, 6 WTS roller shutter cabinets, contents: 250 tool holders SK 50, touch probes, clamping devices, setup tools |
| 23 | Chip Vacuum | 1 | RINGLER RA320-D, YOM 2001, Serial no. 20010222, power 6 kW |
| 24 | Industrial Vacuum Cleaner | 1 | RINGLER RI 300-W2E, Serial no. 2004 20390 |
| 25 | Pallet Truck | 1 | K-PZ 0,0000051, YOM 2012, Weighing device, weighing range max. 2,200 kg |
| 26 | Scissor Lift Platform | 1 | LISSMAC SABB-118, Lifting height 12.5 m, load capacity 150 kg |
| 27 | Chip Vacuum | 1 | RINGLER RA320-D, YOM 2002, Serial no. 200221736, power 6 kW |
| 28 | Oil Filling Cart | 1 | FTS, YOM 2000, Serial no. 22793, filling volume max. 1,000 l, pump BRP, delivery rate 9,000 l/min |
| 29 | HSC Portal Milling Machine | 1 | DROOP + REIN FOG 2500 HS11/13NW, YOM 1995, Serial no. 01028, control, manufacturer Droop + Rein, type System IBF/Grundig Elektronics, table size 5,000 x 3,000 mm, travel X/Y/Z 4,500 x 2,500 x 1,200 mm, spindle speed 10,000 rpm, tool holder HSK 63/100, 32-position tool changer, tool monitoring, manufacturer Brankamp, WTS roller shutter cabinet, metal, equipped with 40 tool holders, drawer cabinet W 1,000 mm, 7 drawers, equipped with indexable inserts, cutters, etc., mobile WTS rack, equipped with clamping devices and accessories, 2 spare spindles 16,000 rpm – machine decommissioned |
| 30 | Double-girder Bridge Crane | 1 | HAISCH, Max. load capacity 32 t / 8 t, span 16 m |
| 31 | Double-girder Bridge Crane | 1 | HAISCH, Max. load capacity 32 t / 8 t, span 16 mm, radio remote control |
| 32 | Load Lifting Magnet | 1 | TECNOMAGNETE MaxX 1000, Load capacity 1,000 kg |
| 33 | Hazardous Materials Cabinet | 1 | ASECOS Q90, YOM 2018, 2-door, ventilation top |
| 34 | Surface Grinding Machine | 1 | ELB SWBDE12, YOM 1982, Serial no. 171991282, magnetic clamping table, manufacturer SAV, clamping size 1,000 x 500 mm, manual control, belt filter |
| 35 | Universal Cylindrical Grinding Machine | 1 | KELLENBERGER 1000 U, Serial no. 32460-2202, center height/width 175 x 1,000 mm, digital display, magnetic chuck, internal grinding spindle, sliding door cabinet, accessories: collets, centers, drivers |
| 36 | Surface Grinding Machine | 1 | JUNG JS625, YOM 1983, Retrofit in 2018; SN 20161, magnetic clamping plate, manufacturer SAV, clamping area 600 x 250 mm, digital display, manufacturer Heidenhain, dressing device, coolant system, filter system, accessories: demagnetizing plate, 2x magnetic table, swivel-mounted, grinding wheels |
| 37 | Engine Lathe | 1 | BOEHRINGER D420, YOM 1977, Serial no. 6183-06, center height/width 210 x 1,200 mm, automatic feed, three-jaw chuck, tailstock, digital display, manufacturer Heidenhain, accessory package with 2 drawer cabinets, W 1,000 mm, 9 drawers, WTS rack, contents: 13 steel holder cassettes, clamping holders, centers, tools, accessories |
| 38 | CNC-Machining Center | 1 | DECKEL-MAHO DMU100T, YOM 2002, Control, manufacturer Heidenhain, type iTNC 530, 5 axes (swivel head, NC rotary table), 32-position tool changer, tool holder SK40, spindle speed 10,000 rpm, chip conveyor, chiller unit, manufacturer Schimpke, belt filter, manufacturer Interlith, type STB3/600HD, recorded operating hours 72,535; 28,209, tool monitoring, manufacturer Brankamp, 4 drawer cabinets/containers, 1 WTS roller shutter cabinet, contents: approx. 150 tool holders SK 40, clamping devices, measuring tools, taps, center drills, 1 heavy-duty vise, manufacturer Allmatic LC 160-200, infrared touch probe (in tool changer) |
| 39 | CNC-Lathe | 1 | BOEHRINGER VDF315 C, YOM 1992, Serial no. 1117.7166-26, control manufacturer VDF/Grundig, 8-station turret, three-jaw chuck, tailstock, travel X/Z 2,000 x 450 mm, 4 drawer cabinets, 2x W 1,000 mm, 7 drawers, 2x W 720 mm, 5/8 drawers, WTS cart, contents: 70 steel tool holders for internal and external machining, tapping chuck with inserts, twist drills, measuring equipment, 3-point internal micrometers 240–400 mm |
| 40 | Double-ended Grinder | 1 | REMA DS25/300A, Stand console, extraction |
| 42 | Scrubber-dryer | 1 | SCRUBTEC 661BL COMBI |
| 43 | Industrial Vacuum Cleaner | 1 | ESTA DUROSOG-W, YOM 1996 |
| 44 | Tool Shrink-fit Device | 1 | HAIMER Powerclamp Premium PC 2011, YOM 2014, Serial no. 710457, power 13 kVA |
| 45 | Tool Dispensing System | 1 | GARANT, Consisting of: 2 drawer cabinets, metal, 11 / 54 drawers, contents: milling tool accessories, incl. face mill heads POKOLM, indexable inserts, milling tools system Mitsubishi / Walther / Bilz, OSG-Phoenix, solid carbide drills Ø 4–20 mm, extensions and shell mills system POKOLM (dispensing system requires new software after cyber attack) |
| 46 | Telescopic Drawer Cabinet | 1 | LISTA, W 720 mm, 13 drawers, contents: DEPO MK extensions, cutter heads, screw-in cutters, internal micrometers Ø 15–120 mm, calibration rings, indexable inserts, carbide drills, carbide cutters |
| 47 | CNC-Machining Center | 1 | DECKEL-MAHO DMU100P DuoBLOCK, YOM 2007, Serial no. 11450001263, control, manufacturer Heidenhain, type iTNC530, 5 axes, CNC rotary/tilting table, travel X/Y/Z 1,000 x 1,000 x 1,000 mm, tool holder SK 50, spindle speed 12,000 rpm, tool monitoring, manufacturer Brankamp, 60-position tool changer, chip conveyor, belt filter system, manufacturer BMF, type KA600, YOM 2007, accessories, recorded operating hours 67,254; 24,704, 2 WTS roller shutter cabinets manufacturer Lista, 3 drawer cabinets W 1,000 mm, 6/8/9 drawers, contents: 100 tool holders SK 50 (complete tools), indexable insert mills, drills, indexable inserts, clamping devices, setup tools, infrared touch probe, tool assembly aid |
| 48 | Zero-point Clamping System | 1 | GARANT Zero Clamp, 8 clamping pots, 4 clamping plates, consoles, base plates, 2 workbenches, wood/metal, contents: accessories for zero-point clamping system |
| 49 | Heavy-duty Vise | 1 | ALLMATIC, BB 160 mm |
| 50 | Chip Transport Bins | 2 | Galvanized metal |
| 51 | Sets Of Gauge Pins | 15 | Ø 2–16 mm (complete) |
| 52 | Pallet Rack | 1 | 6 linear meters, metal, upright height 3,000 mm, 5 levels, shelf load 3,000, bay load 12,000 kg |
| 54 | Double-girder Bridge Crane | 1 | KWG, Max. load capacity 32 t / 8 t, span 16 m |
| 55 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, outreach 4,000 mm |
| 56 | Wall-mounted Slewing Crane | 1 | KONECRANES, Max. load capacity 500 kg, outreach 4,000 mm |
| 57 | Wall-mounted Slewing Crane | 1 | KONECRANES, Max. load capacity 500 kg, outreach 7,000 mm |
| 58 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, outreach 3,000 mm |
| 59 | Double-girder Bridge Crane | 1 | WÖHR, Max. load capacity 16 t / 4 t, span 16 m |
| 60 | Tool Cabinets | 2 | LISTA, 2-door, contents: tool assembly aid, 2 tool holders SK 50, WTS 5-fold, setup tools |
| 61 | Drawer Cabinet | 1 | LISTA, W 720 mm, 10 drawers, contents: clamping screws for inserts and holders, insert holders, quick-change tap chuck M4–M33, front pieces for “hedgehog” cutters, drive rings, spacer washers, boring heads KAISER, collets |
| 62 | Drawer Cabinet | 1 | LISTA, W 720 mm, 6 drawers, contents: NCT extensions, two-flute cutters |
| 63 | Drawer Cabinet | 1 | LISTA, W 720 mm, 8 drawers, contents: reducing sleeves, MK1–MK5, solid carbide roughing mills, countersinks, indexable insert drills, Ø 24–80 mm |
| 64 | Drawer Cabinet | 1 | LISTA, W 720 mm, 8 drawers, contents: extensions/reductions Kaiser system, tap chuck inserts, setup tools |
| 65 | Drawer Cabinet | 1 | LISTA, W 720 mm, 8 drawers, contents: CBN indexable inserts, edge finder, Ingersoll cutter body holder for 6 cutter bodies, Ø 200 mm, shank mills, Torx keys, indexable insert drills, solid drill holder SK 50 |
| 66 | Drawer Cabinet | 1 | LISTA, W 720 mm, 7 drawers, contents: face mill POKOLM Mirroworx, shank mills, cylindrical gauge block set Ø 10–100 mm, shell mills |
| 67 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 11 drawers, contents: hex keys, open-end wrenches, socket wrenches, drill chuck keys, screwdrivers, triangular scraper, die holder |
| 68 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 11 drawers, contents: twist drills, taps, reamers, dies |
| 69 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 11 drawers, contents: twist drills 5–35 mm |
| 70 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 11 drawers, contents: dies M3–M30, outside micrometers Ø 0–300 mm, open-end wrenches, screw clamps |
| 71 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 11 drawers, contents: machine taps M3–M42, fine-thread drills M20x1.5–M50x2, reamers Ø 3–63 mm, twist drills Ø 60–100 mm |
| 72 | Drawer Cabinet | 1 | LISTA, Twist drills Ø 3.5–100 mm |
| 73 | Tool Cabinet | 1 | 2-door, contents: 7 electric hand tools FEIN / BOSCH / METABO |
| 74 | Tool Dispensing System | 1 | GARANT, Consisting of: 3 drawer cabinets, metal, 9, 11, 54 drawers, contents: consumables, files, open-end wrenches, twist drills, masonry drills (dispensing system requires new software after cyber attack) |
| 75 | Steel Cabinet | 1 | 2-door, 1 shelf, contents: guides, circlips, proximity switches, pressure plates, marking stamps |
| 76 | Steel Cabinet | 1 | LISTA, 2-door, 1,000 x 600 x 1,800 mm, contents: compressed air accessories |
| 77 | Steel Cabinet | 1 | 2-door, 1,000 x 600 x 1,800 mm, contents: engraving machine Nill + Ritz, abrasives |
| 78 | Steel Cabinet | 1 | 2-door, 1,000 x 600 x 1,800 mm, contents: cutting spray, machine taps, compasses, engineer’s squares, sockets, screwdrivers |
| 79 | Steel Cabinet | 1 | 2-door, 1,000 x 600 x 1,800 mm, contents: grinding pins |
| 80 | Steel Cabinet | 1 | 2-door, 1,000 x 600 x 1,800 mm, contents: grinding pins, sharpening stones, crane hooks |
| 81 | Sliding Door Cabinets | 4 | LISTA, Grinding wheels, work gloves, earplugs |
| 82 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: files, screws, sharpening stones, grinding pins |
| 83 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: files, file handles, flap wheels, grinding rings |
| 84 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: fastening clamps, wing nuts, carbide burrs, batteries, deep drawing spray, centering pins, plastic plugs |
| 85 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: feeler gauges, spring washers, set screws, number punches, grinding wheels, wire, extension cables |
| 86 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: screws, sharpening stones |
| 87 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: screws, T-nuts |
| 88 | Drawer Cabinet | 1 | LISTA, W 1,000 mm, 10 drawers, contents: files, depth caliper, outside micrometers, cutter heads, 2 touch probes, indexable inserts |
| 89 | Chemical Storage Cabinet | 1 | ASECOS Q90, YOM 2018, 2-door, ventilation top |
| 91 | Pallet Rack | 1 | 2 elements, W/D/H 1,800 x 1,100 x 3,000 mm, 3 levels, shelf load 2,080 kg, bay load 6,240 kg |
| 92 | Low-temperature Storage Cabinet | 1 | THERMO ELECTRON HFC 486 Basic, Serial no. 40726748, max. temp. -86° C, internal space W/D/H 1,000 x 450 x 800 mm |
| 93 | Drawer Cabinets | 4 | W 820 mm, 9 drawers, contents: Parker hose connection elements, Ermeto fittings, hole punches, cutting bushes |
| 94 | Workbench System | 1 | Wood/metal, L 7,000 mm, 1 Leinen vise, 4 drawer cabinets |
| 95 | Drawer Cabinets | 2 | KAISER + KRAFT, W 720 mm, 6 drawers |
| 96 | Drawer Cabinet | 1 | W 720 mm, 8 drawers |
| 97 | Column Drilling Machine | 1 | ALZMETALL AB36/SV, YOM 1999, Serial no. 300-93-J410J9, speed 1,785 rpm, feed 0.4 mm/rev, quill travel 160 mm, digital display, magnetic lamp, drill vise, machine table clamp |
| 98 | Double-ended Grinder | 1 | REMA DS04/175, Stand console |
| 99 | Drawer Cabinet | 1 | KAISER + KRAFT, W 720 mm, 6 drawers, contents: small parts, accessories, machine vise, hose reel |
| 100 | Drawer Cabinet | 1 | W 720 mm, 11 drawers |
| 101 | Tool Cabinets | 6 | Metal, 2-door, drawer cabinet, metal, 15 drawers |
| 102 | Marking-out Plates | 2 | 1,000 x 1,500 mm |
| 103 | Single-girder Bridge Crane | 1 | KWG, Max. load capacity 1.6 t, span 5 m, trolley manufacturer SWF |
| 104 | Pallet Rack | 1 | 6 elements, 15 linear meters, D/H 1,100 x 3,000 mm, 3–4 levels, shelf load 1,280 kg / bay load 5,120 kg |
| 105 | Drawer Cabinet | 1 | LISTA, Metal, 2 tool cabinets, metal, 2-door, mobile drawer cabinet, manufacturer Lista, contents: DIN parts, fittings, grease nipples |
| 106 | Drawer Cabinet | 1 | HAHN & KOLB, W 1,000 mm, 10 drawers, 1 steel cabinet 2-door, contents: hand tools, hydraulic accessories |
| 107 | Heavy-duty Transport Tool | 1 | GKS, 2 transport rollers, steerable chassis, drawbar, hydraulic jack V10, max. load capacity 10,000 kg |
| 108 | Tool Trolley | 1 | GEDORE, Contents: hand tools, accessories |
| 109 | Tool Trolley | 1 | GEDORE, Contents: hand tools, accessories |
| 110 | Tool Trolley | 1 | GEDORE, Contents: hand tools, accessories |
| 111 | Tool Trolley | 1 | GEDORE, Contents: hand tools, accessories |
| 112 | Workbench | 1 | Metal/wood, vise, storage shelf, 4 drawer cabinets, metal, each 9 drawers, 2 tool cabinets, swivel chair, contents: small parts, accessories |
| 113 | Workbench System | 1 | Metal/wood, 7 vises, base cabinets |
| 114 | Industrial Vacuum Cleaner | 1 | RINGLER RI 300-W2E, Power 2.6 kW, equipment cart |
| 115 | Drawer Cabinets | 2 | W 720 mm, 9 drawers, 2 sliding doors |
| 116 | Heavy-duty Support Stands | 2 | |
| 117 | Radial Drilling Machine | 1 | HAHN (DIAG), YOM 1979, Outreach 2,000 mm, feed, 4 prisms, 1 accessory cabinet 6 drawers, contents: clamping devices, reducing sleeves, change chuck |
| 118 | Drawer Cabinets | 4 | Metal, 8 drawers each, tool cabinet, contents: hand tools, accessories, drills, HSS drills |
| 119 | Tool Trolley | 1 | GARANT |
| 120 | Workbenches | 2 | TRAUB, 2,000 x 750 mm, 2 vises, base cabinet 4 drawers, 1 door element |
| 121 | Workbench System | 1 | Metal/wood, 6 vises, 2 drawer cabinets, metal, 11 drawers, tool cabinet, metal, 2-door, contents: hand tools, small parts, accessories |
| 122 | Tool Trolley | 1 | GEDORE W1504, Tool trolley, contents: hand tools, accessories |
| 123 | Chamfering Device | 1 | SCHALLBERGER Facette Star FS500/1000, Equipment cart, mobile |
| 124 | Drawer Cabinet | 1 | W 1,200 mm, 8 drawers, contents: DIN parts, mobile marking-out plate 500 x 400 mm |
| 125 | Marking-out Table | 1 | Metal, 3,000 x 1,500 mm, base frame, wood, thread tapping arm Flexarm, magnetic stand |
| 126 | Drawer Cabinets | 3 | W 720 mm, 8 drawers, contents: hand tools, electrical/pneumatic items |
| 127 | Rack | 1 | Contents: compressed air hoses, quick couplings, marking-out blocks |
| 128 | Industrial Vacuum Cleaner | 1 | STARMIX |
| 129 | Heavy-duty Support Stands | 2 | HYWEMA, Max. load capacity each 30,000 kg |
| 130 | Mobile Support Stands | 2 | HYWEMA, Max. load capacity each 25,000 kg |
| 131 | Pallet Rack | 1 | 6 linear meters, metal, upright height 2,500 mm, 4 levels, shelf load 1,600 kg, bay load 4,800 kg, 20 wooden support stands |
| 132 | Bench Drilling Machine | 1 | ALZMETALL AB45S, YOM 1987, Serial no. 1450, max. speed 1,280 rpm, max. feed 0.3 rpm, max. quill travel 180 mm, drawer cabinet, metal, 6 drawers, contents: HSS drills, drill vise |
| 133 | Double-ended Grinder | 1 | REMA DS25/300A, Stand console, integrated extraction |
| 134 | Double-ended Grinder | 1 | REMA DS04/175, Stand console |
| 135 | Assembly Radial Drilling Machine | 1 | WEILER VOM50, YOM 2003, Serial no. 150390481, horizontal/vertical traveling column 1,000 mm, outreach 1,000 mm, speed 800 rpm, feed, central clamping, operator console, clamping cube 800 x 700 x 800 mm, clamping plate 3,500 x 1,500 mm, 3 T-slots |
| 136 | Bench Drilling Machine | 1 | ALZMETALL AB45/S, YOM 1999, Serial no. 2294, max. speed 1,280 rpm, max. feed 0.22 rpm, max. quill travel 200 mm, drawer cabinet, metal, 5 drawers, contents: HSS drills, drill vise, 4-jaw chuck |
| 137 | Chemical Storage Cabinet | 1 | ASECOS Q90, YOM 2018, Ventilation top |
| 138 | Drawer Cabinets | 4 | Metal, 2 tool cabinets, cabinet with sliding doors, contents: small parts, accessories, screws, nuts, etc. |
| 139 | Pallet Rack | 1 | METALUX, 6 linear meters, metal, upright height 2,500 mm, shelf load 1,500 kg, bay load 4,500 kg |
| 140 | Electric High-lift Stacker | 1 | STILL EGV-16, YOM 2000, Serial no. 710246003352, max. load capacity 1,600 kg, charger 24V 40A |
| 141 | Workbench | 1 | 2,000 x 750 mm, vise, base cabinet 4 drawers, 1 door element, 1 drawer cabinet W 700 mm, 7 drawers |
| 142 | Tool Trolley | 1 | GEDORE W1504, Contents: hand tools, accessories |
| 143 | Workbench | 1 | LISTA, 3,000 x 750 mm, 3 drawer cabinets each with 5 drawers, 1 vise, 3 sliding door cabinets 2-door, 1 drawer cabinet W 700 mm, 8 drawers, inspection lamp trolley |
| 144 | Workbench | 1 | L 7,000 mm, 8 base cabinets, 3 vises, 3 drawer cabinets W 500–1,000 mm, 5–7 drawers |
| 145 | Workbench | 1 | L 7,000 mm, 5 base cabinets with drawers/door elements, 3 vises, 2 sliding door cabinets 2-door, 1 hand lever shear |
| 146 | Workbench | 1 | L 5,000 mm, 4 base cabinets with drawers/door elements, 2 vises, 1 sliding door cabinet 2-door, 3 drawer cabinets W 700–1,000 mm, 8 drawers |
| 147 | Wall-mounted Slewing Cranes | 3 | VETTER, Outreach 4,000 mm, chain hoist, max. load capacity 500 kg |
| 148 | Double-girder Bridge Crane | 1 | KWG, Max. load capacity 20 t / 5 t, span 10 m |
| 149 | Double-girder Bridge Crane | 1 | KWG, Max. load capacity 20 t / 5 t, span 10 m |
| 150 | Double-girder Bridge Crane | 1 | KWG, Max. load capacity 20 t / 5 t, span 10 m |
| 151 | Double-girder Bridge Crane | 1 | KWG, Load capacity 50 t / 12.5 t, span 24 m, radio remote control |
| 152 | Pallet Rack | 1 | 2 elements, W/D/H 2,700 x 1,100 x 3,000 mm, 4 levels, shelf load 2,000 kg, bay load 8,000 kg |
| 153 | Spindle Support | 1 | HESSMER UVM2, YOM 2000, Serial no. 40505, 1 double-ended grinder, manufacturer Rema, type DS04/175, stand console |
| 154 | Radial Drilling Machine | 1 | KOLB, YOM 1990, Outreach 3,000 mm, max. speed 1,000 rpm, max. feed 3 mm/rev, 1 drawer cabinet, W 1,000 mm, 9 drawers, 2 sliding door cabinets, 2-door, contents: drill chucks, reamers, countersinks, drills, clamping cube |
| 155 | Column Drilling Machine | 1 | ALZMETALL AB50/SV, YOM 2002, Serial no. 31690, max. speed 1,530 rpm, feed 0.36 mm/rev, max. quill travel 200 mm, drill vise, machine table clamp, 2 drawer cabinets W 720 mm, 9 drawers, contents: accessories, twist drills |
| 156 | Lot Heavy-duty Support Stands | 1 | Wood, approx. 32 pcs. |
| 157 | Workbench | 1 | L 6,000 mm, 5 base cabinets, 1 vise height-adjustable, 2 drawer cabinets W 1,000 mm, 8 drawers |
| 158 | Tool Trolley | 1 | GARANT, Contents: hand tools, accessories |
| 159 | Tool Container | 3 | LISTA, 4 drawers, mobile |
| 160 | Sliding Door Cabinets | 2 | 2-door, contents: work gloves, work equipment |
| 161 | Tool Trolley | 1 | GEDORE 1504, With contents |
| 162 | Standard Parts Racks | 2 | Galvanized, 1,240 x 600 x 1,650 mm, 7 levels, storage bins |
| 163 | Workbench Systems | 2 | L 5,000 / 9,000 mm, 3/4 base cabinets, compartment racks |
| 164 | Horizontal Band Saw | 1 | MÖSSNER REKORD SSF/500, YOM 1964, Band welding unit Ideal |
| 165 | Steel Cabinets | 5 | 2-door, 2 drawer cabinets, W 1,000 mm, 9 drawers, contents: FESTO items, tool labels, aids, small parts |
| 166 | Heavy-duty Trailer | 1 | PLAN 80.8, YOM 2018, Chassis no. 32957-2, load capacity 60 t, 4 axles, platform 4,000 x 2,000 mm, 1 lot spare wheels |
| 167 | Self-propelled Rail Trolley | 1 | PLAN EGB50, YOM 2002, Serial no. 20034, max. load capacity 50,000 kg, platform 4,000 x 2,000 mm, track gauge 1,435 mm, permissible axle load front/rear 27,250 kg, control unit, accessories |
| 168 | Workbench System | 1 | L 9,000 mm, 5 base cabinets, 3 vises |
| 169 | Workbench System | 1 | L 9,000 mm, 5 base cabinets, 3 vises |
| 170 | Tool Trolley | 1 | GEDORE 1504, Contents: hand tools, accessories |
| 171 | Industrial Vacuum Cleaner | 1 | STARMIX |
| 172 | Workbench System | 1 | L 4,500 mm, 4 base cabinets with 6 drawers, height-adjustable vise, 2 tool cabinets |
| 173 | Workbench System | 1 | L 4,500 mm, 4 base cabinets with 2–6 drawers, 2 height-adjustable vises |
| 174 | Workbench | 1 | L 3,500 mm, 2 base cabinets with 6 drawers, 1 vise height-adjustable, 2 drawer cabinets W 1,000 mm, 8 drawers, contents: standard parts |
| 175 | Guillotine Shear | 1 | PELS STA10/2050, YOM 1958, Serial no. 1277, working width 2,050 mm, max. sheet thickness 10 mm |
| 176 | Hand Lever Shear | 1 | MUBEA, Equipment table |
| 177 | Swing Bending Machine | 1 | HERA UM IV, Serial no. 2325, working width 2,020 mm, max. sheet thickness 5 mm |
| 178 | Welding Fume Extraction System | 1 | GOODAIRE 1200, Mobile |
| 179 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, outreach 6,000 mm |
| 180 | Wall-mounted Slewing Crane | 1 | DEMAG, Max. load capacity 500 kg, outreach 3,000 mm |
| 181 | Wall-mounted Slewing Crane | 1 | KONECRANES, Max. load capacity 500 kg, outreach 5,000 mm |
| 182 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, chain hoist Vetter, outreach 3,000 mm |
| 183 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, chain hoist SWF, outreach 3,000 mm |
| 184 | Wall-mounted Slewing Crane | 1 | Max. load capacity 500 kg, chain hoist Liftket, outreach 5,000 mm |
| 186 | Double-girder Bridge Crane | 1 | KWG, Max. load capacity 16 t / 5 t, span 27 m (defective) |
| 187 | Double-girder Bridge Crane | 1 | KONECRANES, Max. load capacity 16 t / 5 t, span 13 m |
| 188 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, outreach 3,000 mm |
| 189 | Wall-mounted Slewing Crane | 1 | VETTER, Max. load capacity 500 kg, outreach 5,000 mm |
| 190 | Double-girder Bridge Crane | 1 | KONECRANES, Load capacity 32 t / 8 t, span 27 m |
| 191 | Double-column Drawing Press | 1 | SMG HZPU500- 1250, YOM 1961, Serial no. 670/1116, max. press force 500 t, table size 1,510 x 1,250 mm, ram stroke 800 mm, installation height 600–1,400 mm, table draw cushion pressure 10–125 t, draw cushion stroke 200 mm, control console, accessory cabinet, clamping devices |
| 192 | Thread Tapping Arm | 1 | QUICKBOY III, Load magnet, straightening plate 2,000 x 1,500 mm, mobile transport cart |
| 193 | Workbenches | 2 | 2,000–3,000 x 1,000 mm, base cabinets, 1 height-adjustable vise, 2 sliding door cabinets / drawer cabinets, 1 steel cabinet 2-door |
| 194 | Workbench | 1 | L 2,500 mm, drawer cabinet, metal, 1 vise |
| 195 | Double-column Drawing Press | 1 | MÜLLER / HYDRAP BZE 625, YOM 1958, Serial no. 840035, max. press force 650 t (400 t ram; 250 t blank holder, can be coupled), ram stroke 1,050 mm, table size 2,500/1,900 mm, table cushion pressure 30–250 t, draw cushion stroke 400 mm, control console, accessories – retrofit 1993 |
| 196 | Double-column Drawing Press | 1 | SMG HZPU250, YOM 1955, Max. press force 250 t, table size 1,230 / 1,100 mm, ram stroke 640 mm, installation height 418–1,058 mm, table draw cushion pressure 5–80 t, draw cushion stroke 540 mm, control console, spare ram, accessories (3 drawer cabinets) with contents |
| 197 | Industrial Vacuum Cleaner | 1 | STARMIX GS Modell 3078 |
| 198 | Double-girder Bridge Crane | 1 | WÖHR, Max. load capacity 20 t / 6.3 t, span 15 m |
| 199 | MIG/MAG Welding Machine | 1 | REHM Synergic Pro2 250-4, Max. welding current 250 A |
| 200 | MIG/MAG Pulsed Welding Machine | 1 | REHM Megapuls Focus 400, Serial no. 266263, max. welding current 400 A, 2x wire feeders, type Megapuls Focus DV2, welding current 400 A/34 V |
| 201 | Double-ended Grinder | 1 | REMA DS15/300A, Stand console, integrated extraction |
| 202 | Plasma Cutting Machine | 1 | REHM Barracuda 60 |
| 203 | Double-ended Grinder | 1 | REMA DS04/175, Stand console |
| 204 | Pallet Rack | 1 | 27 linear meters, upright height 3,500 mm, 4 levels |
| 205 | Self-propelled Rail Trolley | 1 | PLAN EGB50, YOM 2002, Serial no. 14673, max. load capacity 50,000 kg, platform 4,000 x 2,000 mm, track gauge 1,435 mm, permissible axle load front/rear 27,070 kg, control unit, accessories |
| 206 | Heavy-duty Pallet Rack | 1 | 4 elements, W/D/H 2,700 x 1,100 x 4,000 mm, 3 levels, shelf load 6,400 kg, bay load 16,000 kg |
| 207 | Drawer Cabinets | 5 | LISTA, W 720 mm, 7–13 drawers, contents: standard parts |
| 208 | Rapid Radial Drilling Machine | 1 | DONAU DanuFlex 145, YOM 2000, Serial no. 140198, max. speed 2,800 rpm, max. feed 0.69 rpm, table size 900 x 450 mm, drawer cabinet, 4 drawers, contents: clamping devices, drill chucks, machine table clamps |
| 209 | Double-ended Grinder | 1 | FLOTT TS200 SD-P, Drawer cabinet, metal, contents: small parts, accessories |
| 210 | Workbench System | 1 | L 8,000 mm, 5 height-adjustable vises, 5 base cabinets each with 6 drawers, contents: hand tools, accessories |
| 211 | Workbench System | 1 | L 7,000 mm, 3 height-adjustable vises, 4 base cabinets with drawers/door elements, contents: hand tools, accessories |
| 212 | Workbench | 1 | 1,800 x 750 mm, height-adjustable vise, base cabinet 6 drawers, straightening table |
| 213 | Drawer Cabinets | 3 | LISTA, W 720 mm, 12–13 drawers, contents: hand tools, accessories: drill sleeves, smoothing irons, reamers, etc. |
| 214 | Marking-out Table | 1 | Metal, table size 2,500 x 1,800 mm |
| 215 | Heavy-duty Rack | 1 | PFEIFER, YOM 2007, 2 elements 2,700 x 1,000 x 4,000 mm, shelf load 5,500 kg, bay load 24,600 kg |
| 216 | Chamfering Machine | 1 | SCHALLBERGER Facette Star FS500/1000, Equipment cart, mobile |
| 217 | Lot Support Stands | 1 | Approx. 34 pcs., load capacity 3,000 kg |
| 218 | Drawer Cabinets | 6 | LISTA, W 720–1,000 mm, 9–11 drawers, 3 sliding door cabinets, manufacturer Dick Lista, contents: standard parts, Parker quick couplings, consumables, 11 electric hand tools, abrasives, measuring equipment, dowel pins |
| 219 | Marking-out Plate | 1 | Metal, 1,500 x 1,200 mm, equipment table made of aluminum system profiles, height gauge, runout tester |
| 220 | Workbench System | 1 | L 12,000 mm, 7 height-adjustable vises, 7 base cabinets manufacturer Lista, assembly table, storage shelf, contents: electric hand tools, hand tools, accessories, small parts |
| 221 | Drawer Cabinets | 4 | HAHN & KOLB, W 1,000 mm, 8 drawers, contents: small parts, accessories, FESTO pneumatic items, SKF ball bearings |
| 222 | Drawer Cabinets | 2 | HAHN & KOLB, W 1,000 mm, 8 drawers |
| 223 | Horizontal Honing Machine | 1 | SUNNEN MBB1290DE, Serial no. 20163 (function uncertain) |
| 224 | Double-ended Grinder | 1 | AEG DWS 300/400, Stand console |
| 225 | Tool Grinding Machine | 1 | Stand console |
| 226 | Industrial Vacuum Cleaner | 1 | RINGLER RI100 W2G, Serial no. 2004-23036, power 2 kW, equipment cart |
| 227 | Column Drilling Machine | 1 | ALZMETALL AB3HST, YOM 1987, Serial no. 1970, max. speed 1,750 rpm, max. feed 0.3 mm/rev |
| 228 | Column Drilling Machine | 1 | ALZMETALL AB3HST, YOM 1992, Serial no. 2321, max. speed 1,750 rpm, max. feed 0.3 mm/rev |
| 229 | Gear Drilling Machine | 1 | WEBO, Serial no. 1026, 2 gear stages, max. speed 1,113 rpm, feed |
| 230 | Bench Grinder | 1 | INDUMASCH 362, Polishing wheel, long belt grinding attachment, extraction |
| 231 | Chamfering Device | 1 | HELD, Equipment cart, mobile |
| 232 | Spindle Support | 1 | ASSFALG UVM2, YOM 1990, Serial no. 904189, base cabinet |
| 233 | Spindle Press | 1 | Column clearance 300 mm, table frame |
| 234 | Vertical Band Saw | 1 | MÖSSNER REKORD SM/520, YOM 1992, Serial no. 28570 |
| 235 | Electro Recorder | 1 | CARBOMATIC, 3 drawer cabinets, metal, 14 drawers, contents: HSS drills, various versions, taps, countersinks, sleeves, etc. |
| 236 | 5 Drawer Cabinets | 5 | W 700 - 1,000 mm, 7–8 drawers, contents: outside micrometers, gauge block sets, calipers, dial indicators, limit gauge pins, engineer’s squares, gauge pins up to Ø 20 mm |
| 237 | Heavy-duty Trailer | 1 | PLAN RP 12-30, Serial no. 20035-2, load capacity 12,000 kg, rear axle load 9,500 kg, platform 3,000 x 1,500 mm |
| 238 | Single-girder Bridge Crane | 1 | WÖHR, Max. load capacity 3.3 t, span 16 m, trolley manufacturer SWF, floor control |
| 239 | Single-girder Bridge Crane | 1 | MAN / GHH, Load capacity 8 t, span approx. 16 m, floor control |
| 241 | Punch Ram System | 1 | POWER HYDRAULIK PT040, 4 punch rams, hydraulic power unit, equipment cart, control cabinet |
| 242 | Guillotine Shear | 1 | ATLANTIK ATS3012, YOM 1986, Serial no. A20031, working width max. 3,050 mm, max. sheet thickness 12 mm, with backgauge, manual cutting gap adjustment, sheet support arm, foot switch |
| 243 | Tryout Press | 1 | ONA-PRES EBd-100- 4,5-AB, YOM 1992, Serial no. P-01125, max. press force 1,000 t, table size 4,500 x 2,700 mm, ram stroke 1,400 mm, installation height 800–2,200 mm, table draw cushion 60–250 t, draw cushion stroke 300 mm, ram cushion stroke 200 mm, press control, additional control for ram, cabinet system 5-piece with accessories |
| 244 | Tryout Press | 1 | ONA-PRES EBd-100- 4.5-AB, YOM 1992, Serial no. P-01126, max. press force 1,000 t, table size 4,500 x 2,700 mm, ram stroke 1,400 mm, installation height 800–2,200 mm, table draw cushion 60–250 t, draw cushion stroke 300 mm, ram cushion stroke 200 mm, press control, additional control for ram, cabinet system 2-piece with accessories |
| 245 | Tryout Press | 1 | MÜLLER WEINGARTEN BZE1600-45.1 1, YOM 1994, Serial no. 208019H1100, press control Beckhoff from 2013, max. press force 1,600 t (ram 1,000 t + blank holder 600 t can be coupled), table size 4,500 x 2,500 mm, ram area 4,500 x 2,300 mm, installation height 1,000–2,550 mm, ram stroke 1,550 mm, table draw cushion pressure 30–360 t, draw cushion stroke 400 mm, control, sliding door cabinet system with accessories, adapter plate ram/table – prior sale reserved – |
| 246 | Workbenches | 2 | DICK/LISTA, 2,000 x 750 mm, 1 height-adjustable vise, base cabinets |
| 247 | Workbench | 1 | DICK/LISTA, 3,000 x 750 mm, 1 height-adjustable vise, base cabinets |
| 248 | Workbenches | 3 | DICK/LISTA, 2,000 x 750 mm, 1 height-adjustable vise, base cabinets |
| 249 | Tool Trolley | 1 | GEDORE 1504, Contents: hand tools, accessories |
| 250 | Tool Trolley | 1 | GEDORE 1504, Contents: hand tools, accessories |
| 251 | Tool Trolley | 1 | GEDORE 1504, Contents: hand tools, accessories |
| 252 | Workbenches | 3 | Wood/metal, 1 height-adjustable vise, 4 base cabinets, contents: hand tools, accessories |
| 253 | Handling Device | 1 | MT Posimat PB160, YOM 2002, Serial no. 2002.50.133, load capacity 120 kg, operating pressure max. 8 bar |
| 254 | Double-girder Bridge Crane | 1 | HAISCH, Load capacity 50 t / 12.5 t, span 22 m, floor control |
| 255 | Double-girder Bridge Crane | 1 | KKI, Max. load capacity 32 t / 8 t, span 20,000 mm |
| 256 | Electric Pallet Truck | 1 | STILL EGV20, YOM 2011, Serial no. 330223B00939, max. load capacity 2,000 kg, charger, inventory no. 41 |
| 270 | Screw Compressor | 1 | KAESER DSD 142, YOM 2014, Serial no. 2073, electrical power 75 kW, max. operating pressure 9 bar, compressor control Kaeser Sigma Control 2, load hours 49,577, refrigerated dryer Kaeser Secotec TF 174, YOM 2018 |
| 271 | Screw Compressor | 1 | ATLAS COPCO GA30C, YOM 2004, Serial no. AII283036, max. operating pressure 12.8 bar, power 30 kW, compressor control Elektronikon II, operating hours 18,326 |
| 272 | KTL Painting System | 1 | EISENMANN/ DÜRR, YOM ca. 1980, Multi-tank pre-treatment line, rinsing/activating, phosphating, circulating conveyor system, dip painting line, continuous drying tunnel, switch and control cabinets, process control system (retrofitted), accessories |
| 273 | Assembly System MAN Adapter TGS/TGX | 1 | YOM 2011, Consisting of: 2 robots, manufacturer Kuka, type KR30-3, YOM 2011, control KRC2, hand programming terminals, 2 CMT welding sources, manufacturer Fronius, type Trans Synergic 4000, wire feeder case, type VR7000CMT, FB RCU 5000i, 2 nozzle cleaning stations, turntable, 2 riveting stations, manufacturer Böllhoff, microprocessor control, type Proface, TIG welding machine, manufacturer Rehm, type Tiger 170 DC, assembly manipulator, swivel-mounted, provision racks, provision platforms |
| 274 | Flanging Press | 1 | HYLATECHNIK HBP80.6.XS4, YOM 2001, Serial no. 19150, press control, operator panel, manufacturer Sütron, type BT20, table size 1,420 x 1,450 mm, press force 80 t, ram stroke 600 mm, installation height 1,100 mm, hydraulic tool clamping, switch and control cabinets, safety devices |
| 275 | Assembly System VW Guide Rail Short/long | 1 | YOM 2002, Consisting of: rotary table “infeed”, marking station, robot, manufacturer Kuka, control KRC1, spot welding tongs, adhesive station, manufacturer SCA, type HS0915-001080, YOM 2002, dispensing control, rotary table “outfeed”, safety fence system, switch and control cabinets, system control with display Sütron BT20 |
| 276 | Flanging Press | 1 | HYLATECHNIK HBP80.6.XS4, YOM 2002, Serial no. 19980, 4-column, press force 800 kN, ram stroke 600 mm, installation height 1,100 mm, table size 1,820 x 1,450 mm, hydraulic tool clamping, press control, operator panel, manufacturer Sütron, type BT20, two-hand control console, safety devices |
| 277 | Rework Station RWT S213 | 1 | YOM 2017, Workbench, 3 drawers, small workbench, 2 drawers, hazardous materials drip tray, steel cabinet, 2-door, gray/blue, visual inspection station with daylight, 600 K |
| 278 | Digital Measuring System | 1 | GOM Atos III Plus, Scanbox, YOM 2016, Measuring volume 550 x 550 x 550 mm³, consisting of: measuring software Atos InSpect 2023, scan head ATOS III, robot module Fanuc M20iA, rotary table, clamping plate 1,500 x 1,000 mm, safety light curtains, pull-out shelf, 2x 3 drawers, contents: grid plates, gauges, stands, tool trolley, manufacturer Atorn, climate chamber, 10 x 6 x 6 m, roller door, entrance door, lighting, roll setup table, manufacturer Witte, dimensions 2,400 x 1,800 x 200 mm, 1 lot clamping devices Witte |
| 279 | Column-mounted Slewing Crane | 1 | ABUS VS, YOM 2016, Load capacity 2,500 kg, outreach 5,000 mm, hook height approx. 6,000 mm |
| 280 | Horizontal Arm Measuring Device | 1 | ZEISS Carmet C160/639041-8122-000, YOM 2002, Serial no. 116536 + 113924, 2 columns, table L/W 4,800 x 3,000 mm, 6 grid plates, 1,000 x 1,300 mm, grid pitch 50 mm, measuring software Metrolog V21, 2 touch probes, manufacturer Zeiss, type RDS-CAM, control and evaluation unit, 2x PC, TFT monitor, keyboard, mouse, 2 steel cabinets, table system, 3-part, drawer cabinet, manufacturer Lista, 13 drawers, contents: measuring accessories, zero-point clamping cart with grid plate 3,500 x 1,500 mm |
| 281 | Coordinate Measuring Machine | 1 | WENZEL RS plus 1518, YOM 2007, Serial no. 075509, measuring software Metrolog, measuring range 1,800 x 1,500 x 1,500 mm, 2 grid plates, 1,200 x 920 mm, grid pitch 50 mm, touch probe Renishaw PH 10M Plus, measuring and evaluation unit, PC, TFT monitor, keyboard, mouse |
| 282 | Column-mounted Slewing Crane | 1 | KWG, YOM 2008, Serial no. K403.5, load capacity 1 t, chain hoist, manufacturer SWF, outreach 2,000 mm |
| 283 | Room Contents | 1 | Consisting of: 3 steel cabinets, 2-door, 2 drawer cabinets W 700 mm, 7–13 drawers, workbench, drawer cabinet, 6 drawers, lot measuring equipment, clamping devices Witte, zero-point clamping cart with grid plate 1,650 x 1,900 mm (Witte) |
| 284 | Blank Loading Station | 1 | NSM, YOM 2007, 2 sliding tables, 4,000 x 2,200 mm, 3 belt conveyors, 800 x 7,000 mm, 2 robots, manufacturer Kuka, type KR 100-2 P2000, control KRC2, hand programming terminal, type KSP2, 2 high-speed doors, blank cleaning station, manufacturer Wandres Evomat, double-blank control, manufacturer NSM, drawing compound system, manufacturer Amtec, type PBS34/34, safety fence system, switch and control cabinets |
| 285 | Double-column Drawing Press | 1 | MÜLLER BZE1600-35.2.1, YOM 1965, Serial no. 902, max. pressure 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), sliding table, 3,500 x 2,750 mm, clamping area ram 3,500 x 2,750 mm, ram stroke 1,400 mm, ram adjustment 350 mm, table draw cushion pressure 36–360 t, table draw cushion stroke 250 mm, hydraulic tool clamping ram, press control, manufacturer Siemens, type Simatic S7, operator panel, type Simatic OP37 |
| 286 | Double-column Drawing Press | 1 | MÜLLER ZE1200-35.2.1, YOM 1965, Serial no. 903, max. pressure 1,200 t, clamping area sliding table 3,500 x 1,900 mm, clamping area ram 3,500 x 1,900 mm, installation height 950 / 2,100 mm, ram stroke 1,150 mm, ram adjustment 350 mm, table draw cushion pressure 24–240 t, table draw cushion stroke 300 mm, hydraulic tool clamping ram, press control, manufacturer Sütron, type BT20, operator panel (conversion by Beck & Rohm) |
| 287 | Double-column Drawing Press | 1 | MÜLLER ZE1200-35.2.1, YOM 1965, Serial no. 904, max. pressure 1,200 t, clamping area sliding table 3,500 x 1,900 mm, clamping area ram 3,500 x 1,900 mm, installation height 950 / 2,100 mm, ram stroke 1,150 mm, ram adjustment 350 mm, table draw cushion pressure 24–240 t, table draw cushion stroke 300 mm, hydraulic tool clamping ram, press control, manufacturer Sütron, type BT20, operator panel (conversion by Beck & Rohm) |
| 288 | Double-column Drawing Press | 1 | MÜLLER ZE1200-35.2.1, YOM 1965, Serial no. 905, max. pressure 1,200 t, clamping area sliding table 3,500 x 1,900 mm, clamping area ram 3,500 x 1,900 mm, installation height 950 / 2,100 mm, ram stroke 1,150 mm, ram adjustment 350 mm, table draw cushion pressure 24–240 t, table draw cushion stroke 300 mm, hydraulic tool clamping ram, press control, manufacturer Sütron, type BT20, operator panel (conversion by Beck & Rohm) |
| 289 | Double-column Drawing Press | 1 | MÜLLER ZE1200-35.2.1, YOM 1965, Serial no. 906, max. pressure 1,200 t, clamping area sliding table 3,500 x 1,900 mm, clamping area ram 3,500 x 1,900 mm, installation height 950 / 2,100 mm, ram stroke 1,150 mm, ram adjustment 350 mm, table draw cushion pressure 24–240 t, table draw cushion stroke 300 mm, press control, manufacturer Sütron, type BT20, operator panel (conversion by Beck & Rohm) |
| 290 | Double-column Drawing Press | 1 | MÜLLER ZE1200-35.2.1, YOM 1965, Serial no. 907, max. pressure 1,200 t, clamping area sliding table 3,500 x 1,900 mm, clamping area ram 3,500 x 1,900 mm, installation height 950 / 2,100 mm, ram stroke 1,150 mm, ram adjustment 350 mm, table draw cushion pressure 24–240 t, table draw cushion stroke 300 mm, press control, manufacturer Sütron, type BT20, operator panel (conversion by Beck & Rohm) |
| 291 | Robot | 6 | KUKA KR 100 R3500 press, YOM 2015, Robot control KRC4, programming terminals, 1 robot (overhead-mounted), manufacturer Kuka, type KR 100 R3500 press, YOM 2016, belt conveyor 1,200 x 7,000 mm, visual inspection station, skylight, 600 K, switch and control cabinets, 5 mobile safety fence systems, accessories |
| 292 | Accessories Package | 1 | 3 provision carts with draw bolts, 1 telescopic drawer cabinet, W 700 mm, 1 steel cabinet 2-door, 1 workbench with base cabinet, spare parts STR. 3, 6 axial piston swash pumps, hydraulic power unit Hilma Roemheld, draw cushion air cylinders, motors |
| 293 | Tool Trolley | 3 | Red, gray, blue (2x locked) |
| 294 | Ride-on Sweeper | 1 | TENNANT 6400, YOM 2007 |
| 295 | Double-column Drawing Press | 1 | HYDRAP HPDZ b 1600, YOM 1994, Serial no. 6784, max. pressure 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), sliding table, 3,600 x 2,200 mm, clamping area ram 3,620 x 2,200 mm, ram stroke 1,500 mm, table draw cushion pressure 36–360 t, table draw cushion stroke 450 mm, press control, operator console, swivel-mounted, linear robot Strothmann |
| 296 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1959, Max. pressure 800 t, max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 1,830 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, removal robot, manufacturer Strothmann (non-functional), switch and control cabinets, accessories |
| 297 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1959, Max. pressure 800 t, max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 1,830 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, removal robot, manufacturer Strothmann (non-functional), switch and control cabinets, accessories |
| 298 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1959, Max. pressure 800 t, max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 1,830 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, removal robot, manufacturer Strothmann (non-functional), switch and control cabinets, accessories |
| 299 | Accessories and Spare Parts Package | 1 | 6 drawer cabinets, W 700 mm, 2 provision carts with draw bolts, lot table trolleys, strapping machine, steel strapping dispenser, equipment cart, lot setup tools, spare parts STR2, motors, overload kits Danly, ram adjustment Danly, ram cushion Danly, small parts |
| 301 | Double-column Drawing Press | 1 | HYDRAP HPDZ b 1600, YOM 1993, Serial no. 6766, max. pressure 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), sliding table, 3,600 x 2,200 mm, clamping area ram 3,600 x 2,200 mm, ram stroke 1,500 mm, table draw cushion pressure 36–360 t, table draw cushion stroke 450 mm, press control, operator console, swivel-mounted – machine operating hours ON 69,569 h, control cabinet |
| 302 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1960, Max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 2,100 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table draw cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, manufacturer Sütron (retrofitted in 2008), hydraulic tool clamping top |
| 303 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1960, Max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 2,100 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table draw cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, manufacturer Sütron (retrofitted in 2008), hydraulic tool clamping top |
| 304 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1960, Max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 2,100 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table draw cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, manufacturer Sütron (retrofitted in 2008), hydraulic tool clamping top |
| 305 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1960, Max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 2,100 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table draw cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, manufacturer Sütron (retrofitted in 2008), hydraulic tool clamping top |
| 306 | Double-column Crank Press | 1 | DANLY S4-800-132-72, YOM 1960, Max. pressure 800 t, clamping area table 3,350 x 1,830 mm, clamping area ram 3,350 x 2,100 mm, ram stroke 610 mm, ram adjustment 508 mm, strokes 12–16 strokes/min, sliding table, table draw cushion pressure 11–113 t, table draw cushion stroke 203 mm, ram cushion stroke 152 mm, press control with operator panel, manufacturer Sütron (retrofitted in 2008), hydraulic tool clamping top |
| 307 | Robot | 1 | KUKA KR 100 R3500 press C, YOM 2017, Serial no. 674997, control KRC4, hand programming terminal, belt conveyor L/W 6,000 x 1,500 mm, visual inspection station, daylight lighting, 600 K |
| 308 | Robot | 5 | KUKA KR100-2 P 2000, YOM 2007, Robot control KRC2, hand programming terminal |
| 309 | Accessories Package | 1 | 5 push-rod carts with draw bolts for head press, 4 provision carts with draw bolts for Danly presses, storage tables, assembly workbench, skylight, table trolleys, strapping machine |
| 310 | Transfer Press | 1 | ARISA LD6-4-1600-450-230-LDE, YOM 2002, Serial no. 816026032, press control, manufacturer Siemens, type Sinumerik 840D, press force 1,600 t, clamping area table 4,500 x 2,300 mm, clamping area ram 4,500 x 2,300 mm, ram stroke 605 mm, ram adjustment 400 mm, installation height min. 900 mm, installation height max. 1,300 mm, strokes 8–22 strokes/min, force draw cushion table 2x 50–200 t, draw cushion stroke 250 mm, force draw cushion ram 2x 5–55 t, ram cushion stroke 150 mm, strip line, coil weight max. 25 t, coil width 300–1,600 mm, sheet thickness 0.6–3.0 mm, consisting of uncoiler, manufacturer Cisam, type ASPO2000DEFCT2516, YOM 2002, straightener, manufacturer Cisam, type RADDRZZATRICE3000/2-9/160FC, YOM 2002, cross cutter, manufacturer Enine, type CLARA, working width 1,600 mm, blank loader, manufacturer Arisa, YOM 2009, 2 travel tables, 1,700 x 950 mm, blank dimensions 450–1,500 x 160–800 mm, transfer system, switch and control cabinets, platform system with stair access, conveyor belt with visual inspection, 4 daylight lamps, 600 K, safety fences, safety devices, high-speed door, spare parts package. Overhaul in 2015 / 2018; gearing, draw cushion, headpiece |
| 311 | Toggle Press | 1 | GECHTER 8/12 HM HKPV, YOM 2021, Press controller Kistler 5867, workbench 2,000 x 750 mm, 3 telescopic drawer cabinets, W 500 mm, tool container, 5 drawers |
| 312 | Column-mounted Slewing Crane | 1 | STAHL, YOM 1977, Chain hoist, manufacturer SWF, load capacity 2,500 kg, outreach 4,000 mm |
| 313 | Drawer Cabinets | 4 | LISTA, W 700 mm, 7–8 drawers, strapping sealer, steel strapping dispenser, equipment cart, 2 steel cabinets, 2-door, green, table trolley |
| 314 | C-frame Eccentric Press | 1 | WEINGARTEN ARV 63, YOM 1970, Serial no. 120400 C, press force 63 t, clamping area table 630 x 525 mm, clamping area ram 315 x 260 mm, strokes 56/84 strokes/min, ram stroke 8–120 mm, ram adjustment 63 mm |
| 315 | Heavy-duty Rack | 1 | Galvanized, 10 elements, 2,000–2,400 x 800 x 4,000 mm, 5 levels, bay load max. 14,000 kg |
| 316 | Swing-cut Guillotine Shear | 1 | RAS 86.33, YOM 2002, Serial no. 27/4, working width 3,190 mm, max. sheet thickness 6.3 mm, control, system 2005, for backgauge and cutting gap adjustment, pneumatic sheet hold-down, conveyor belt, safety light curtains, 4 front support arms, 2x foot switch, angle stop, blank lifting table, 2,000 x 2,000 mm, connected load 18.5 kW |
| 317 | Visual Inspection Station | 1 | 2x skylight 6000 K, 2 assembly roller tables with base cabinet + skylight, 1 tool container W 500 mm, 5 drawers, 1 steel strapping machine Signode, steel strapping dispenser, mobile small workbench with base cabinet |
| 318 | Double-column Drawing Press | 1 | MÜLLER ZE400-20.24.1, YOM 1986, Machine no. 498601, max. pressure 400 t, clamping area table 2,000 x 1,300 mm, clamping area ram 2,000 x 1,300 mm, installation height min./max. 600–1,400 mm, ram stroke 800 mm, ram adjustment 200 mm, table draw cushion pressure 5–160 t, draw cushion stroke 350 mm, ram draw cushion pressure 5–40 t, ram cushion stroke 125 mm, 2x two-hand operation, safety fence system, press control, 2 accessory cabinets with contents |
| 319 | Heavy-duty Rack | 1 | OHRA P3, YOM 2013, 6.9 linear meters, D/H 1,200 x 4,000 mm, 3 levels, shelf load 6,000 kg, bay load 21,000 kg (3 bays 1,500/2,700 mm) |
| 320 | Spindle Press | 1 | DREHER SPPG-40/100, YOM 1974, Press force 40 t, column clearance 600 mm |
| 321 | Drawer Cabinets | 2 | W 700/1,000 mm, 6–7 drawers, contents: welding accessories |
| 322 | Welding Workstation | 1 | Welding table, 2,000 x 1,500 mm, storage table, muffle furnace, manufacturer Carbolite, internal chamber dimensions W/D/H 370 x 270 x 550 mm, extraction system Kemper, flexible extraction hose, LED spotlight with stand |
| 323 | Welding Machine | 1 | REHM RP462, Welding control Professional, wire feeder case, welding helmet |
| 324 | TIG Welding Machine | 1 | REHM 400DC, Digital display, hose package, pressure regulator, welding helmet |
| 325 | Radial Drilling Machine | 1 | CSEPEL 12RH/2000, YOM 1987, Serial no. 76012, clamping cube 700 x 700 x 800 mm, outreach 2,000 mm, max. speed 1,400 rpm, max. feed 0.63 mm/rev, 2 drawer cabinets W 1,000 mm, 8 drawers, contents: clamping devices, drilling machine accessories |
| 326 | Guillotine Shear | 1 | RAS 82.10, Working width 1,000 mm, max. sheet thickness 2 mm, backgauge manual |
| 327 | Column Drilling Machine | 1 | ALZMETALL AB36 SV, YOM 2001, Serial no. 866, max. speed 4,000 rpm, digital speed display, quill travel 160 mm, max. feed 0.3 mm/rev, keyless drill chuck, cross table, drawer cabinet W 700 mm, 6 drawers, contents: drills, clamping devices |
| 328 | Precision Surface Grinding Machine | 1 | DEGEN FS-S4080, YOM 2000, Machine no. 157, magnetic clamping plate 800 x 400 mm, control, operator console, swivel-mounted, coolant system, belt filter, straight dressing device, 2 grinding wheels with mounting flange |
| 329 | Arc Welding Machine | 1 | CEM SVE300S |
| 330 | Overhead Crane K404.W1 | 1 | DEMAG, Crane runway L/W 6,000 x 8,000 mm, chain hoist, manufacturer SWF, load capacity 1,000 kg |
| 331 | Industrial Vacuum Cleaner | 1 | RINGLER RI300-W2G, Equipment cart |
| 332 | Tool Container | 2 | W 560 mm, 6 drawers, contents |
| 333 | Tool Container | 2 | W 560 mm, 6 drawers, contents |
| 334 | Tool Container | 2 | W 560 mm, 6 drawers, contents |
| 335 | Tool Container | 2 | W 560 mm, 6 drawers, contents |
| 339 | Tool Container | 2 | W 560 mm, 6 drawers, contents |
| 340 | Linear Meter Workbench System | 11 | 7 base cabinets, manufacturer Garant, W 560 mm, 5 drawers, 2 vises, manufacturer Leinen, 2 tool assembly tables, 2,000 x 1,250 mm, 6 cable reels, 220/280 kV |
| 341 | Double-girder Bridge Crane | 1 | LIFTCAT, Load capacity 1.5 t, span 8 m |
| 342 | Roller Band Saw | 1 | HAHN & KOLB SSF420, YOM 2001, Serial no. 29811, table 600 x 600 mm, outreach 420 mm, band welding unit, manufacturer Ideal |
| 343 | Double-ended Grinder | 1 | REMA DS 12/200, Stand console |
| 344 | Marking-out Plate | 1 | Dimensions 2,000 x 1,500 mm, 1 mobile |
| 345 | Tool Container | 4 | LISTA, W 560 mm, 6 drawers, 4.5 linear meters workbench system, 2 |
| 347 | Gooseneck Heavy-duty Trailer | 1 | PLAN, YOM 2002, Load capacity 12 t, towing hitch, permissible gross weight 4 t |
| 348 | Double-girder Bridge Crane | 1 | KWG, Load capacity 25 t / 8 t, span 20 m, radio remote control |
| 349 | Double-girder Bridge Crane | 1 | TAUCHA, Load capacity 10 t, span 20 m, trolley, manufacturer SWF, radio remote control |
| 350 | Double-girder Bridge Crane | 1 | ABUS, Load capacity 32/8 t, span 20 m, radio remote control |
| 351 | Double-girder Bridge Crane | 1 | KONECRANES, Load capacity 40/10 t, span 20 m, radio remote control |
| 352 | Double-girder Bridge Crane | 1 | HAISCH, Load capacity 40 t, span 20 m, floor control |
| 353 | Double-girder Bridge Crane | 1 | TAUCHA, Load capacity 40 t, trolley, manufacturer SWF, span 20 m, floor control |
| 354 | Double-girder Bridge Crane | 1 | HAISCH, Load capacity 40 t, span 20 m, radio remote control |
| 355 | Double-girder Bridge Crane | 1 | TAUCHA, Load capacity 40 t, span 20 m, trolley, manufacturer SWF, radio remote control |
| 356 | Load Lifting Magnet | 1 | Load capacity approx. 500 kg |
| 357 | Electromechanical Universal Testing Machine | 1 | ZWICK ROELL 1484, YOM 1981, Tensile force 250 kN, travel 1,400 mm, optics for recording deformation (from 2007), evaluation unit, specimen punch ZWICK RZ 65, specimen grinding machine 7120 (in locked storage) |
| 358 | Universal Hardness Tester | 1 | EMCO M4C 025, YOM 2004, Serial no. 410804, max. force 2,450 N, control |
| 359 | Heavy-duty Rack | 1 | OHRA P3, YOM 2018, 5 elements, bay width 2,250 mm, D/H 1,580 x 4,600 mm, 2 levels, shelf load 4,000 kg, bay load 8,000 kg |
| 360 | Blank Turning Station | 1 | WIMO, YOM 2003, Blank size / gripper range 1,800 x 3,500 mm, max. load capacity 6,000 kg, package thickness 380–440 mm, connected load 6 kW, control console, safety fence system |
| 361 | Rail Heavy-duty Trailer | 1 | MAFI GW BATT, YOM 1998, Serial no. 231228, max. load capacity 50 t, L 3,000 mm, track gauge 1,350 mm – for coils |
| 362 | Heavy-duty Rack | 1 | OHRA P3, YOM 2018, 4 elements 2,250 x 1,580 x 5,000 mm, 2 levels, shelf load 4,000 kg, bay load 8,000 kg |
| 363 | Heavy-duty Rack | 1 | OHRA P3, YOM 2011, 3 bays, 2,300 x 1,200 x 5,000 mm, 2 levels, shelf load 8,000 kg, bay load max. 20,600 kg |
| 364 | Heavy-duty Rack | 1 | BITO P1, YOM 2003, 4 elements, 2,000 x 1,200 x 3,500 mm, 5 levels, shelf load 2,500 kg, grating floors |
| 365 | Heavy-duty Rack | 1 | BITO P3, YOM 2016, 11 elements, W/D/H 2,700 x 1,200 x 4,000 mm, 3–5 levels, shelf load 3,000 kg |
| 366 | Double-girder Bridge Crane | 1 | MEHNE, Load capacity 32 t, span 20 m, radio remote control |
| 367 | Double-girder Bridge Crane | 1 | KWG, Load capacity 32 t, span 20 m, radio remote control |
| 368 | Coil Gripper | 1 | DOLAST GW300-2000, YOM 2002, Serial no. 4380, load capacity 25 t, coil width 300–2,000 mm, storage rack |
| 369 | Scissor Lift Tables | 2 | SECO HTF50, YOM 2017, Load capacity 500 kg, table size 1,000 x 600 mm |
| 370 | Blank Loader STR 4 | 1 | Blank dimensions min./max. 265–1,800 x 350–1,800 mm, position detection, double-blank control, 2 robots, manufacturer Kuka, type KR100 R3500 press, YOM 2017, control KRC4, hand control terminal, acceleration belts, washing system Wandres EVO, YOM 2005, oiling station, manufacturer Raziol FGP 2001, YOM 2021 |
| 371 | Double-column Hydraulic Press | 1 | SCHULER SMG HZPU-T 1000-2500/2100, YOM 2001, Serial no. 7.5592, press force 1,000 t, shuttle table 2,500 x 2,100 mm, ram area 2,500 x 2,100 mm, ram stroke max. 1,300 mm, table draw cushion pressure 30–200 t, draw cushion stroke 300 mm, press control with OP Siemens Simatic OP 37, switch and control cabinets |
| 372 | Double-column Hydraulic Press | 1 | SCHULER SMG HZPU-T 630-2500/2100, YOM 2001, Serial no. 7.5593, press force 630 t, shuttle table 2,500 x 2,100 mm, ram area 2,500 x 2,100 mm, ram stroke max. 1,300 mm, table draw cushion pressure 24–160 t, draw cushion stroke 200 mm, ram draw cushion pressure 15–100 t, draw cushion stroke 150 mm, press control with OP Siemens Simatic OP 37, switch and control cabinets |
| 373 | Double-column Hydraulic Press | 1 | SCHULER SMG HZPU-T 630-2500/2100, YOM 2001, Serial no. 7.5595, press force 630 t, shuttle table 2,500 x 2,100 mm, ram area 2,500 x 2,100 mm, ram stroke max. 1,300 mm, table draw cushion pressure 24–160 t, draw cushion stroke 200 mm, ram draw cushion pressure 15–100 t, draw cushion stroke 150 mm, press control with OP Siemens Simatic OP 37, switch and control cabinets |
| 374 | Double-column Hydraulic Press | 1 | SCHULER SMG HZPU-T 630-2500/2100, YOM 2001, Serial no. 7.5596, press force 630 t, shuttle table 2,500 x 2,100 mm, ram area 2,500 x 2,100 mm, ram stroke max. 1,300 mm, table draw cushion pressure 24–160 t, draw cushion stroke 200 mm, ram draw cushion pressure 15–100 t, draw cushion stroke 150 mm, press control with OP Siemens Simatic OP 37, switch and control cabinets |
| 375 | Double-column Hydraulic Press | 1 | SCHULER SMG HZPU-T 630-2500/2100, YOM 2001, Serial no. 7.5594, press force 630 t, shuttle table 2,500 x 2,100 mm, ram area 2,500 x 2,100 mm, ram stroke max. 1,300 mm, table draw cushion pressure 24–160 t, draw cushion stroke 200 mm, ram draw cushion pressure 15–100 t, draw cushion stroke 150 mm, press control with OP Siemens Simatic OP 37, switch and control cabinets |
| 376 | Robot | 5 | KUKA KR100 R 3500 press, YOM 2015, Control KRC4, hand programming terminal, outfeed belt conveyor 1,600 x 7,000 mm |
| 377 | Room Contents | 1 | Consisting of: workbench, base cabinet, vise, height-adjustable, racks, steel cabinet, 2-door, gray/blue, drawer cabinet 3x 6 drawers, contents: FESTO items, table trolley, box provision cart, 5 levels, industrial vacuum cleaner, double-ended grinder, manufacturer Rema, type DS15/300A, stand console |
| 378 | Lot Small Equipment / Workbenches STR4 | 1 | Consisting of: needle marker RICHTER, tool trolley, manufacturer Metec, setup trolley, lot grippers, 3 workbenches, tool container, tool cabinet, 2-door, steel cabinet, 2-door, 4 table trolleys with draw bolts |
| 379 | Double-girder Bridge Crane | 1 | ABUS, Load capacity 32/8 t, span 20 m, radio remote control |
| 380 | Double-girder Bridge Crane | 1 | KWG, Load capacity 50 t, span 20 m, radio remote control |
| 381 | Coil C-hook | 1 | STAHL, YOM 1989, Load capacity 15 t |
| 382 | Heavy-duty Rack | 1 | OHRA P3, YOM 2016, 22 elements, 2,300 x 1,200 x 4,500 mm, 2–3 levels, shelf load 8,000 kg, bay load 16,000 kg |
| 383 | Pallet Rack | 1 | OHRA P3, YOM 2014, 7 elements, 3,000/4,000 x 1,200 x 5,000 mm, 4 levels, shelf load 1,000 kg, bay load 3,000 kg, some grating floors |
| 384 | Heavy-duty Rack | 1 | BITO PT 95L, YOM 2012, 19 elements, 2,000–2,700 x 1,200 x 4,000 mm, 3–5 levels, shelf load 2,500 kg, grating floors |
| 385 | Paternoster Storage System | 1 | INTERTEX 160-1000-685/457/14-14/1000, YOM 2011, Serial no. 124262, permissible gross weight 38,280 kg, max. payload 12,600 kg, max. tray load 300/400/700 kg, microprocessor control, W/D/H 6,000 x 3,000 x 10,000 mm |
| 386 | Scissor Lift Table | 1 | KAISER & KRAFT M2000, YOM 2003, Load capacity 2,000 kg, table size 2,000 x 1,000 mm, steel strapping machine |
| 394 | Mobile Extraction Units | 3 | FESTO CTM48 ELE, Power 1200 W, workcenter WCR 1000, 1x CT 22E |
| 395 | Mobile Extraction Units | 3 | FESTO CTM48 ELE, Power 1200 W, workcenter WCR 1000, 1x CT 22E |
| 396 | Workshop Trolley | 7 | 1,200 x 750 mm, base cabinet with drawers, door element, 2 workbenches, 1 BDE trolley |
| 397 | Scissor Lift Tables | 2 | SECO, 850 x 500 mm, load capacity 300 kg |
| 398 | Roll Cabinets | 2 | Gray 900 x 500 x 1,650 mm, contents: FESTO orbital sander, abrasives |
| 399 | Steel Cabinets | 3 | 900 x 450 x 1,800 mm, 2-door, gray/blue, contents: orbital sander, operating materials |
| 400 | Extraction System | 1 | KELLER Vario 2 PM6-BM30, YOM 2023, Serial no. 3299782, cleaning pressure 6 bar, power max. 5.5 kW |
| 403 | Slosh Test Test Stands | 2 | FESTO, YOM 2008 / 2013, Clamping table for tanks, switch and control cabinets, measuring and evaluation unit, accessories |
| 404 | 3D Printer | 1 | GERMAN REPRAP X400, Computer, manufacturer Fujitsu Siemens, Intel Core i5, equipment table |
| 407 | Pressure Cycling Test Stand | 1 | VAF, YOM 2019, Serial no. 009, medium air, test pressure -0.3 to 0.65 bar, max. air volume 30 l, PC control, lot measuring and test cables, provision rack, sliding table system, Festo components, workbench, hazardous materials cart, measuring and test technology |
| 412 | Overhead Crane | 1 | L/W 5,000 x 7,000 mm, 7 crane runways, without chain hoists |
| 413 | Overhead Crane | 1 | L/W 16 x 5 m, 5 crane runways, without chain hoists |
| 414 | Heavy-duty Rack | 1 | 6 elements, 2,700 x 1,200 x 7,000 mm, 5 levels, grating floors |
| 417 | TIG Welding Machine | 1 | REHM Invertig Pro Digital 280 AC/DC, Welding control, equipment cart |
| 424 | Universal Drilling and Milling Machine | 1 | THIEL Duplex 158, Serial no. 21403, max. spindle speed 1,800 rpm, digital display, table 700 x 350 mm, high-pressure machine vise, jaw width 120 mm, rotary table, 1 accessory cabinet 1-door with contents |
| 428 | Seam Welding Machine | 1 | DALEX PMS 14-4, Serial no. 29417167, welding power 224 kVA, electrode force 1,200 daN, welding control, type MPS8043/1 |
| 429 | Seam Welding Machine | 1 | ARO PE90SC, YOM 2016, Serial no. V160016000F, welding power 114 kVA, welding control, manufacturer Aro, type Micro 2X16III |
| 430 | Spot Welding Machine | 1 | DALEX PMS 12-5 MF, YOM 2008, Serial no. 30861, welding power 224 kVA, electrode force 720 daN, control, manufacturer Dalex, foot operation |
| 435 | Column-mounted Slewing Crane | 1 | VETTER AS2,5-5,0, YOM 2012, Load capacity 250 kg, outreach 5,000 mm |
| 439 | Transfer Press | 1 | ARISA LD8-4-2000- 470-230-LDE, YOM 2005, Serial no. 820016341, press control, manufacturer Siemens, type Sinumerik 840D, press force 1,800 t, clamping area table 4,500 x 2,300 mm, clamping area ram 4,500 x 2,300 mm, ram stroke 750 mm, ram adjustment 400 mm, installation height min. 900 mm, installation height max. 1,300 mm, strokes 8–24 strokes/min, force draw cushion table 2x 300–200 t, draw cushion stroke 250 mm, force draw cushion ram 2x 5–55 t, ram cushion stroke 150 mm, strip line, coil weight max. 25 t, coil width 300–1,800 mm, sheet thickness 0.5–3.0 mm, consisting of uncoiler and loading cart, straightening machine, oiling station, transfer system, switch and control cabinets, platform system with stair access, conveyor belt L 10,000 mm, workbench system with base cabinets and vise, QS workstation |
| 440 | Paternoster Storage System | 1 | INTERTEX 75-50-660-17- 600, YOM 2004, Serial no. 4921, 19 trays, W/D/H 4,000 x 2,000 x 6,500 mm, max. payload 59.5 kN |
| 441 | Double-girder Bridge Crane | 1 | KONECRANES, Load capacity 50/10 t, span 20 m, radio remote control |
| 442 | Double-girder Bridge Crane | 1 | KONECRANES, Load capacity 50/10 t, span 20 m, radio remote control |
| 443 | Coil Hook | 1 | WIMO, Load capacity 25 t |
| 444 | Heavy-duty Trailer | 2 | PLAN 80-8, YOM 2018, Chassis no. 32957-1; 33779, load capacity 60 t, 4 axles, platform 4,000 x 2,000 mm, 1 lot spare wheels |
| 445 | Double-girder Bridge Crane | 1 | HAISCH, Load capacity 32 t, span 20 m, trolley, manufacturer SWF, radio remote control |
| 446 | Double-girder Bridge Crane | 1 | HAISCH, Load capacity 32 t, span 20 m, trolley, manufacturer SWF, radio remote control |
| 447 | Continuous Paint Line KB BR 222/217 | 1 | B&M, YOM 2011, Part size 1,200 x 800 x 400 mm, consisting of: 4 painting robots, paint dryer, heating medium natural gas, max. temperature 100°, exhaust air volume flow 1,500 m³/h, circulating conveyor system, manufacturer Hero, lot load carriers, switch and control cabinets, provision and supply racks, platform system, stair access, accessories |
| 448 | Continuous Degreasing and Washing System | 1 | B&M, YOM 2011, 2x degreasing, 2x rinsing, 1x residual moisture dryer, heating medium natural gas, wastewater treatment system, manufacturer Loft, burner, manufacturer Buderus, demineralization system, heat exchanger, switch and control cabinets, platform system, accessories |
| 449 | Thick-film Paint Booth KB BR MFA2 Terostat Coating OP 130 | 1 | B&M Spritzstand, YOM 2012, Serial no. 12.015, max. workpiece dimensions 1,500 x 300 x 500 mm, exhaust air filter with air capacity 15,000 m³/h, handling system, manufacturer Dalmec, load capacity 20 kg (manipulator 3), Teroson pump, manufacturer Atlas Copco, dispensing station, manufacturer SCA, manipulator, manufacturer Strödter, exhaust system, manufacturer Alko, platform system, switch and control cabinets, accessories |
| 450 | Heavy-duty Rack | 1 | BITO, YOM 2013, 8 elements, 2,700 x 1,200 x 6,000 mm, 6 levels, shelf load max. 3,000 kg, bay load max. 18,500 kg |
| 451 | Assembly Cell Final Assembly Full-pressure Tank | 1 | 2 assembly positioners, W 1,500 mm, 2 handling systems, manufacturer Dalmec, QC test tongs, torque screwdriver, manufacturer Desoutter, system control, manufacturer Siemens, type Simatic HMI Touch, provision and storage racks, spring balancers, accessories |
| 452 | Leak Test Station KB BR222/217 ECE USA | 1 | MOTIVE WELDING TECHNOLOGIES, YOM 2013, Tank size 2,500 x 1,500 x 600 mm, lowering frame, column-mounted slewing crane, manufacturer Demag, load capacity 500 kg, safety light curtains, switch and control cabinet, operator panel, manufacturer Siemens, type Simatic HMI Touch, BDE and QS terminal, provision cart |
| 453 | Burst Pressure Tank | 1 | YOM 2012, Test tank 1,500 x 1,000 x 800 mm, lowering frame, motorized, safety door, control, operator panel, manufacturer Sütron, pump, pressure gauge, control cabinet |
| 454 | Rework Station | 1 | Welding machine, manufacturer Rehm, type Synergic 324C |
